/ doc / DocFrag / ARCCore.PropertyStreamLineWithOrigin.DoNotAddTimestamp / Attribute / Description

Description

Edit keys at this level only

= Normally -StreamProcessor- inserts the required -Timestamp-s in the AgoRapide storage.0x000D0x000A0x000D0x000A-DoNotAddTimestamp- is a hack used when synchronizing an AgoRapide storage with other databases.0x000D0x000ANormally the synchronization is supposed to always be up-to-date, but at startup of the AgoRapide application some gap will naturally exist since the application was last shut down.0x000D0x000AThe initial synchronization at application startup can therefore utilize timestamp information from the source database, and signal through this property (DoNotAddTimestamp) that -StreamProcessor should NOT also insert timestamps itself (because the correct timestamps are much older).0x000D0x000A0x000D0x000ABeware that this is not an optimal solution because at application startup -StreamProcessor- will inevitably do some logging with up to date timestamps BEFORE synchronization starts, before older timestamps, meaning that timestamps in the AgoRapide storage (in the -PropertyStream-) are not sequential in rising order.0x000D0x000A0x000D0x000ATODO: An alternative would be to just inject the new properties directly in the data storage BEFORE -StreamProcessor- TODO: is initialized (storing text files directly into the data storage directory without knowledge of the -StreamProcessor-).0x000D0x000ATODO: BUT, if the actual synchronization status is stored within the data storage, we have a chicken-and-egg problem TODO: because then -StreamProcessor- would be needed in order to read the storage into memory TODO: BEFORE the synchronization takes place.0x000D0x000A

Edit keys at all sub levels.
NOTE: Edits are always additive. Use 'Invalid' in order to delete keys.

Generated 2026-08-19 13:58:02.638 UTC