/ doc / DocFrag / ARCCore.StreamProcessor.AddOrRemoveOutgoingConnections / Description

Description

Edit keys at this level only

= Not relevant for -CoreDB-.0x000D0x000A0x000D0x000ANote how this method supports live updating of connecting instructions over the -PropertyStream- because it can be called at regular intervals.0x000D0x000A(TODO: Live updating is not implemented from 'outside' as of Mar 2020).0x000D0x000AShould be called after -Initialize.0x000D0x000A0x000D0x000AFor each outgoing connection not found in list of connection instructions, add it to list. For each active (outgoing) connection not on list of outgoing connections, close it.0x000D0x000A0x000D0x000ANote how the actual objects are shared with the 'outside' after the call, meaning that changes to for instance the subscripton, could be immediately reflected on the 'inside' (here). In practical terms this is however a bit difficult to achieve so in practice. A work-around could be (when you want to change some parameters for a specific connection), that you set the connection Invalid, call this metod, do the changes, set it valid-again (by setting Invalid to default(DateTime), and call this method a final time.0x000D0x000ATODO: Find some better way than description above.

Edit keys at all sub levels.
NOTE: Edits are always additive. Use 'Invalid' in order to delete keys.

Generated 2025-08-07 04:32:08.217 UTC