[ROOT]  doc  DocFrag  SELECT Assembly, DocFragType, Description.FirstLine()   <  SKIP 22  >   <  TAKE 128  >   

128 items

DocFragIdAssemblyDocFragTypeDescription.FirstLine()
ARCCore.Extensions.UseARCCoreClassMemberConvenience method that shortens down code in cases where an instance of an object must be created first in order to use that same variable multiple times
ARCCore.Extensions.ToStringDateAndTimeARCCoreClassMemberUses format 'yyyy-MM-dd HH:mm:ss.fff'.
ARCCore.Extensions.AddValueARCCoreClassMemberGives better error messages compared to 'original' Add when adding a value to a directory if key already exists
ARCCore.IKCoded.EnrichKeyARCCoreClassMember'Implementing' -ITypeDescriber-.
ARCCore.IKARCCoreClassIK = Interface Key / Index key. Key used to lookup 'inside' an instance of -IP-.
ARCCore.IKCoded.TryCheckValidEncodedValueARCCoreClassMemberChecks if encoded value is valid.
ARCCore.IKCodedARCCoreClassUnderstands coded and unencoded variants of -IK-.
ARCCore.IKCoded.FromCacheEncodedARCCoreClassMemberReduces number of objects generated by caching those known to be within a limited range
ARCCore.IKCoded.ToStringARCCoreClassMemberReturns -Encoded-'s string representation.
ARCCore.IKCoded.FromCacheUnencodedARCCoreClassMemberReduces number of objects generated by caching those known to be within a limited range
ARCCore.IKCoded.EncodedARCCoreClassMemberThis string value can be used directly in folder names, file names and HTTP URL's without any further encoding being necessary.
ARCCore.IKDate.op_EqualityARCCoreClassMemberIt is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here.
ARCCore.IKDate.ValidDateTimeFormatsARCCoreClassMemberNote: Be very careful about expanding this array. ToString must be considered, and also how Equals should work with other sub classes of IK.
ARCCore.IKDate.EnrichKeyARCCoreClassMember'Implementing' -ITypeDescriber-.
ARCCore.IKLongARCCoreClassA more memory efficient alternative to -IKString-.
ARCCore.IKStringARCCoreClassIndex key for any general id, like primary-key or sequence-number or similar.
ARCCore.IKString.FromStringARCCoreClassMemberNote how uses instance cache if already exists there
ARCCore.IKString.FromCacheARCCoreClassMemberReduces number of objects generated by caching those known to be within a limited range
ARCCore.IKString.op_EqualityARCCoreClassMemberIt is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here.
ARCCore.ITypeDescriber.GetSyntaxHelpARCCoreClassMemberEnables explanation of syntax in different contexts from one source:
ARCCore.IKType.ToStringARCCoreClassMemberCaching is supposed to be useful because may be called quite often.
ARCCore.ParseResultARCCoreClassNOTE: Concept is very old, from the dark ages of AgoRapide's very first inception. There might be room for improvement.
ARCCore.ITypeDescriberARCCoreClassProvides a standardized mechanism for describing single-property values (like 'PhoneNumber' of 'Customer' for instance).
ARCCore.PK.ToStringARCCoreClassMemberCaching is supposed to be useful because may be called quite often.
ARCCore.PK.TryGetVARCCoreClassMemberOnly type of PK, string or type of __enum is allowed to ask for (as TRequest generic type parameter).
ARCCore.PK.TryValidateAndParseARCCoreClassMemberParses the value according to specifications for this property key.
ARCCore.PK.GetAARCCoreClassMemberConvenience method for easy access to -BasePKAttribute- with corresponding explaining exception if fails
ARCCore.PK.TryGetFromTypeAndFieldName Overload3ARCCoreClassMemberReturns property key based on type and field name.
ARCCore.PK.GetAllPKForEntityTypeStringARCCoreClassMemberReturns all property keys relevant for the given entity type,
ARCCore.PK.TryGetFromTypeAndFieldName Overload2ARCCoreClassMemberReturns property key based on type and field name.
ARCCore.PK.BuildFromStringCacheARCCoreClassMemberBuilds the content of -_fromStringCache- and also -_allPKForEntityTypeCache-.
ARCCore.PK.TryGetFromTypeAndFieldName Overload1ARCCoreClassMemberReturns property key based on type and field name.
ARCCore.PK.GetTypeMappingARCCoreClassMemberReturns the relevant property key for a given type entity-type and field-type.
ARCCore.PK.GetAllPKForEntityTypeARCCoreClassMemberReturns all property keys relevant for the given entity type,
ARCCore.PK.GetObligatoryValuesForEntityTypeARCCoreClassMemberReturns all obligatory values (based on -IsObligatory-)
ARCCore.PK.ValidatorAndParserARCCoreClassMemberValidates and parses a value.
ARCCore.PK.__enumARCCoreClassMemberThis information is also found as EnumMember.
ARCCore.PK.CleanerARCCoreClassMemberCleanup of values, to be used before value is attempted validated.
ARCCore.PKHTMLAttributeARCCoreClassContains pointer to HTML encoder for a property.
ARCCore.PK.AllEnumsARCCoreClassMemberAll enums for the whole application.
ARCCore.PKHTMLAttribute.EncodeARCCoreClassMemberEncodes the given string to HTML format through the static method implemented in class -Encoder-.
ARCCore.PK.AllPKEnumsARCCoreClassMemberAll -PropertyKeyEnum--tagged enums for the whole application.
ARCCore.PKHTMLAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PKLogAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.PKRelAttribute.EnforceReferentialIntegrityARCCoreClassMemberSee -EnforceReferentialIntegrity-.
ARCCore.PKLogAttribute.DoNotLogAtAllARCCoreClassMemberSee -DoNotLogAtAll-.
ARCCore.PKRelAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PKLogAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PKTypeAttributeARCCoreClassContains the most basic essential information about a property key, like its description, -Type-, -Cardinality-, -IsObligatory- and -DefaultValue-.
ARCCore.PKRelAttributeARCCoreClassDescribes relationships between entities (between tables in RDBMS terms).
ARCCore.PKTypeAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PKTypeAttribute.CardinalityARCCoreClassMemberSee -Cardinality-.
ARCCore.IP.InitializeARCCoreClassMemberNote that has a default implementation (doing nothing).
ARCCore.PKTypeAttribute.DefaultValueARCCoreClassMemberSee -DefaultValue-.
ARCCore.IP.AssertIntegrityARCCoreClassMemberSee -TryAssertIntegrity-.
ARCCore.PKTypeAttribute.IsObligatoryARCCoreClassMemberSee -IsObligatory-.
ARCCore.IP.TryAssertIntegrityARCCoreClassMemberAsserts the integrity of this entity.
ARCCore.PKTypeAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.IP.ToStringARCCoreClassMemberThe ToString()-implementation in the classes implementing this interface is supposed to give a short concise representation of the object for debugging and logging purposes, that is, intended for human consumption. The most 'important' implementation is probably the one in -PRich- (-ToString-) because that one is often the basis for your entity classes like 'Customer', 'Order' and so on
ARCCore.IP.TryGetV Overload1ARCCoreClassMemberThe actual 'unpacking' of the object.
ARCCore.IP.AddPARCCoreClassMemberAdds a property for this object.
ARCCore.IP.DeepCopyARCCoreClassMemberCreates a deep copy of this object instance, that is, a copy with all new object instances (except for immutable objects).
ARCCore.IP.AddOrUpdatePARCCoreClassMemberDuplicates functionality of SetP.
ARCCore.IP.AddPV Overload2ARCCoreClassMemberNOTE: The different AddPV / AddP overloads should only be used if you want an assertion against the
ARCCore.IP.GetOrAddPVARCCoreClassMemberGets value. If not set then value will be added
ARCCore.IP.AddPV Overload1ARCCoreClassMemberAdds a property value (as a -PValue-) for this objectThrows -KeyAlreadyExistsException- when relevant.
ARCCore.IP.GetPVARCCoreClassMemberGets a single property's value for this object. Returns default value if not successful.
ARCCore.IP.ValuesARCCoreClassMemberReturns all the values (all the properties) for this instance.
ARCCore.IP.AllIPDerivedTypesWithPKEnumApplicationSpecificARCCoreClassMemberAll relevant -IP--derived types for the -ApplicationSpecificCode- part of the application for which also is defined a -PropertyKeyEnum-.
ARCCore.IP.LoggerARCCoreClassMemberDescribes a logger.
ARCCore.IP.AllIPDerivedEntityCollectionClassesDictARCCoreClassMemberAll -IP--derived types for which is found a corresponding class with name like '{EntityType}Collection'
ARCCore.IP.AllIPDerivedTypesARCCoreClassMemberAll relevant -IP--derived types for the whole application.
ARCCore.IP.AllIPDerivedTypesInludingGenericAndAbstractARCCoreClassMemberAll relevant -IP--derived types (except the interface -IP- itself) known to the application.
ARCCore.IP.AllIPDerivedTypesWithPKEnumARCCoreClassMemberAll relevant -IP--derived types for the whole application for which the also is defined a -PropertyKeyEnum-.
ARCCore.IP.AllIPDerivedTypesDictARCCoreClassMemberProvides lookup of a type in -AllIPDerivedTypes- given its string representation.
ARCCore.PCollection.GetKeysEqualToValueARCCoreClassMemberReturns properties which themselves again have key and value equal to the given key and value.
ARCCore.IGetKeysEqualToValueARCCoreClassInterface stating that implementing class does not use the default implementation of -GetKeysEqualToValue- (which does not use -Indexing-) but has replaced it with a more efficient implementation assumed to utilize -Indexing-.
ARCCore.PCollection.TryGetPARCCoreClassMemberMade virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway.
ARCCore.PConcurrentARCCoreClassA (somewhat) thread-safe alternative to -PRich- which also supports -ExposingApplicationState- (through -Logger-).
ARCCore.PCollection.TryGetVARCCoreClassMemberNote that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.PConcurrent.ToStringARCCoreClassMemberTODO: Decide on what we actually want with ToString for this class.
ARCCore.PCollection.ToStringARCCoreClassMemberTODO: Decide on what we actually want with ToString for this class.
ARCCore.PExact<TEnumType>ARCCoreClassVery -MemoryConsumption- efficient alternative to -PRich-.
ARCCore.PExact<TEnumType>..ctorARCCoreClassMemberSet capacity to the number of members in the -PropertyKeyEnum- for this class (minus the __invalid-value)
ARCCore.IIKII.PackParseResultForStorageInIKIIARCCoreClassMemberThis method corresponds to -PackParseResultForStorageInEntityObject-.
ARCCore.PExact<TEnumType>.StorageARCCoreClassMemberUses int-value of -__enum- minus 1 as index.
ARCCore.IIKII.PackObjectForStorageInIKIIARCCoreClassMemberThis method corresponds to -PackObjectForStorageInEntityObject-.
ARCCore.PIIARCCoreClassPII = property for storing individual items.
ARCCore.PReadOnlyARCCoreClassExperimental (from Feb 2022) class suitable for classes that do not need to be deserialized, or to accept write requests through -PropertyAccess-.
ARCCore.PII.TryGetVARCCoreClassMemberSince value is stored in keys, we need to override this method.
ARCCore.PRichARCCoreClassFully flexible storage. Can store anything. Typical inherited for entity representations like 'Customer' or 'Order'.
ARCCore.PRich.TryGetPARCCoreClassMemberMade virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway.
ARCCore.PValueEmpty.ToPropertyStreamARCCoreClassMemberTypicall return value could be something like
ARCCore.PRich.TryGetVARCCoreClassMemberNote that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.ActualConnectionARCCoreClassThe actual connection, its internal state, queue for sending and so on.
ARCCore.PRich.ToStringARCCoreClassMemberTODO: Decide on what we actually want with ToString for this class.
ARCCore.ActualConnection.SetMyUpdatePositionGeneratorARCCoreClassMemberSet by -StreamProcessor-.
ARCCore.PValue<T>ARCCoreClassSingle value storage.
ARCCore.ActualConnection.SetSinglePropertyStreamReceiverARCCoreClassMemberSet by -StreamProcessor-.
ARCCore.PValue<T>.TrySetPARCCoreClassMemberNOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty-
ARCCore.ActualConnection.SetUpToDatePositionGeneratorARCCoreClassMemberSet by -StreamProcessor-. Not used by -Client-.
ARCCore.PValue<T>.TryGetVARCCoreClassMemberSupports duck typing.
ARCCore.ActualConnection.InitializeOutgoingConnectionARCCoreClassMemberRelevant for -Outgoing-.
ARCCore.PValue<T>.ConvertObjectToStringARCCoreClassMemberConverts object to string.
ARCCore.ActualConnection.CommunicateARCCoreClassMemberCommon for both -Incoming- and -Outgoing-.
ARCCore.PValue<T>.ToStringARCCoreClassMemberDo no cache this value, because memory consumption would then increase significantly in your applicationj
ARCCore.ActualConnection.LogAndSendErrorConditionDataARCCoreClassMemberCalled when a serious error condition has been discovered and connection should be terminated.
ARCCore.BasePKAttribute.GetAttributesARCCoreClassMemberNote that illegal to call for other than -PropertyKeyEnum-.
ARCCore.BaseAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.BasePKAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.BaseAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.ClassAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.BasePKAttributeARCCoreClassThe class containing the actual attributes used for -TaggingOfPropertyKeys-.
ARCCore.ClassAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.BasePKAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.EnumAttribute.GetAttributeARCCoreClassMemberThrows exception if tagged as -PropertyKeyEnum- and name of type does not end with capital letter 'P' (like 'CustomerP' for enum describing class 'Customer' for instance).
ARCCore.ClassAttribute.GetAttributeARCCoreClassMemberThrows exception if type implements -IP- and no corresponding enum found (enum ending with capital letter 'P' (like 'CustomerP' for enum describing class 'Customer' for instance)
ARCCore.EnumAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.ClassAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.ExtensionsARCCoreClassContains a few general nice to have extensions methods.
ARCCore.ClassMemberAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.Extensions.ToStringVeryShortARCCoreClassMemberReturns same as -ToStringShort- but without any generics information at all.
ARCCore.EnumMemberAttributeARCCoreClassDescribes an enum's value.
ARCCore.Extensions.SingleARCCoreClassMemberSame as inbuilt LINQ's Single except that gives a more friendly exception message
ARCCore.EnumMemberAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.Extensions.SingleOrDefaultARCCoreClassMemberSame as inbuilt LINQ's SingleOrDefault except that gives a more friendly exception message
ARCCore.EnumMemberAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.Extensions.ToStringWithMSARCCoreClassMemberUses either format 'd\.hh\:mm\:ss\.fff' or 'hh\:mm\:ss\.fff' depending on TotalHours >=24 hours or not.

Generated 2026-07-08 14:46:51.344 UTC