[ROOT]  doc  DocFrag  SELECT Assembly, DocFragType, Description.FirstLine()   <  SKIP 136  >   <  TAKE 48  >   

48 items

DocFragIdAssemblyDocFragTypeDescription.FirstLine()
ARCCore.ActualConnection.SetMyUpdatePositionGeneratorARCCoreClassMemberSet by -StreamProcessor-.
ARCCore.BasePKAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.EnumAttributeARCCoreClassDescribes an enum.
ARCCore.ActualConnection.SetSinglePropertyStreamReceiverARCCoreClassMemberSet by -StreamProcessor-.
ARCCore.ClassAttribute.GetAttributeARCCoreClassMemberThrows exception if type implements -IP- and no corresponding enum found (enum ending with capital letter 'P' (like 'CustomerP' for enum describing class 'Customer' for instance)
ARCCore.EnumAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.ActualConnection.SetUpToDatePositionGeneratorARCCoreClassMemberSet by -StreamProcessor-. Not used by -Client-.
ARCCore.ClassMemberAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.EnumMemberAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.ActualConnection.InitializeOutgoingConnectionARCCoreClassMemberRelevant for -Outgoing-.
ARCCore.EnumAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.Extensions.ToStringVeryShortARCCoreClassMemberReturns same as -ToStringShort- but without any generics information at all.
ARCCore.ActualConnection.CommunicateARCCoreClassMemberCommon for both -Incoming- and -Outgoing-.
ARCCore.IPAttributeARCCoreClassDescribes -IP- classes (describes at class-level)
ARCCore.Extensions.AddValueARCCoreClassMemberGives better error messages compared to 'original' Add when adding a value to a directory if key already exists
ARCCore.ActualConnection.LogAndSendErrorConditionDataARCCoreClassMemberCalled when a serious error condition has been discovered and connection should be terminated.
ARCCore.Extensions.ToStringDBARCCoreClassMemberGives the minimum representation of type as string suitable for later reconstruction by -GetType-.
ARCCore.Extensions.ResultARCCoreClassMemberReturns heading plus return-value of function (calls function). If function == null then empty string is returned
ARCCore.ClientUpdatePositionARCCoreClassDescribes from WHERE (from WHEN) in the historic -PropertyStream- new data is to be returned.
ARCCore.Extensions.SingleARCCoreClassMemberSame as inbuilt LINQ's Single except that gives a more friendly exception message
ARCCore.Extensions.ToStringDateAndTimeARCCoreClassMemberUses format 'yyyy-MM-dd HH:mm:ss.fff'.
ARCCore.ClientUpdatePosition.FilenameARCCoreClassMemberFilename like '2020-04-03 08:42:22_R001'
ARCCore.Extensions.SingleOrDefaultARCCoreClassMemberSame as inbuilt LINQ's SingleOrDefault except that gives a more friendly exception message
ARCCore.IKCoded.FromCacheEncodedARCCoreClassMemberReduces number of objects generated by caching those known to be within a limited range
ARCCore.ClientUpdatePosition.IndexARCCoreClassMemberIndex (zero-based) into file. Value of -1 means blank update status / no data received at all (or no data received for this specific filename)
ARCCore.IKCoded.EnrichKeyARCCoreClassMember'Implementing' -ITypeDescriber-.
ARCCore.IKCoded.FromCacheUnencodedARCCoreClassMemberReduces number of objects generated by caching those known to be within a limited range
ARCCore.ClientUpdatePosition.ClientDatastoreIsEmptyARCCoreClassMemberUsed by the subscribing client to signify that it has no data stored locally, and it therefore needs an update from the beginning of the -PropertyStream-, that is, 'from the beginning of time'.
ARCCore.IKCoded.TryCheckValidEncodedValueARCCoreClassMemberChecks if encoded value is valid.
ARCCore.IKDate.ValidDateTimeFormatsARCCoreClassMemberNote: Be very careful about expanding this array. ToString must be considered, and also how Equals should work with other sub classes of IK.
ARCCore.ClientUpdatePosition.OnlyNewDataIsRequestedARCCoreClassMemberUsed by the subscribing client to signify that it does not care about historical data, the server may start with sending only new data.
ARCCore.IKCoded.AllowedEncodedCharactersARCCoreClassMemberThe character set 'A...Za...z0...9-_().,='.
ARCCore.IKLongARCCoreClassA more memory efficient alternative to -IKString-.
ARCCore.ClientUpdatePosition.IsGoBackARCCoreClassMemberHas to be translated by -StreamProcessor- into a concrete filename / index.
ARCCore.IKDateARCCoreClassA more memory efficient alternative to -IKString- (together with -IKLong-).
ARCCore.ITypeDescriber.GetSyntaxHelpARCCoreClassMemberEnables explanation of syntax in different contexts from one source:
ARCCore.ClientUpdatePosition.IsAtEndOfStreamARCCoreClassMemberNecessary in order to implement -AdHocQuery-.
ARCCore.IKString.FromStringARCCoreClassMemberNote how uses instance cache if already exists there
ARCCore.ParseResultARCCoreClassNOTE: Concept is very old, from the dark ages of AgoRapide's very first inception. There might be room for improvement.
ARCCore.ClientUpdatePosition.ClientDatastoreIsEmptyInstanceARCCoreClassMemberSee also -ClientDatastoreIsEmpty.
ARCCore.IKString.op_EqualityARCCoreClassMemberIt is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here.
ARCCore.PK.PackObjectForStorageInEntityObjectARCCoreClassMemberSee -PackParseResultForStorageInEntityObject- for documentation.
ARCCore.PropertyStreamLine.ParseAndStoreFailSafeARCCoreClassMemberIf either parsing or storing fails then this method will call -StoreFailure- in order to keep some track of why parsing or storing failed.
ARCCore.PKARCCoreClassPK = AgoRapide PropertyKey.
ARCCore.PK.FromEnumARCCoreClassMemberReturns the corresponding -PK- instance from the given -PropertyKeyEnum-.
ARCCore.PropertyStreamLine.StoreFailSafeARCCoreClassMemberStores if possible and fails silently.
ARCCore.PK.TryGetEnumARCCoreClassMemberNote that usually you will not have to ask for this value, usually in AgoRapide it goes the other way around, you have the enum member / enum value and want the corresponding property key.
ARCCore.PK.AllEnumsARCCoreClassMemberAll enums for the whole application.

Generated 2026-05-05 08:55:58.436 UTC