[ROOT]  doc  DocFrag  SELECT Assembly, DocFragType, Description.FirstLine()   <  SKIP 145  >   <  TAKE 124  >   

124 items

DocFragIdAssemblyDocFragTypeDescription.FirstLine()
ARCCore.EnumMemberAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.Extensions.SingleARCCoreClassMemberSame as inbuilt LINQ's Single except that gives a more friendly exception message
ARCCore.IPAttributeARCCoreClassDescribes -IP- classes (describes at class-level)
ARCCore.Extensions.SingleOrDefaultARCCoreClassMemberSame as inbuilt LINQ's SingleOrDefault except that gives a more friendly exception message
ARCCore.Extensions.UseARCCoreClassMemberConvenience method that shortens down code in cases where an instance of an object must be created first in order to use that same variable multiple times
ARCCore.IKIP.AssertTypeIntegrityARCCoreClassMemberSee -TryAssertTypeIntegrity- for documentation.
ARCCore.Extensions.AddValueARCCoreClassMemberGives better error messages compared to 'original' Add when adding a value to a directory if key already exists
ARCCore.IKIP.TryAssertTypeIntegrityARCCoreClassMemberAsserts that value is of correct type as specified by the key.
ARCCore.IKARCCoreClassIK = Interface Key / Index key. Key used to lookup 'inside' an instance of -IP-.
ARCCore.IKCoded.ToStringARCCoreClassMemberReturns -Encoded-'s string representation.
ARCCore.IKCodedARCCoreClassUnderstands coded and unencoded variants of -IK-.
ARCCore.IKCoded.EncodedARCCoreClassMemberThis string value can be used directly in folder names, file names and HTTP URL's without any further encoding being necessary.
ARCCore.IKCoded.AllowedEncodedCharactersARCCoreClassMemberThe character set 'A...Za...z0...9-_().,='.
ARCCore.IKLong.op_EqualityARCCoreClassMemberIt is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here.
ARCCore.IKDateARCCoreClassA more memory efficient alternative to -IKString- (together with -IKLong-).
ARCCore.IKLong.EnrichKeyARCCoreClassMember'Implementing' -ITypeDescriber-.
ARCCore.IKStringARCCoreClassIndex key for any general id, like primary-key or sequence-number or similar.
ARCCore.ITypeDescriber.GetSyntaxHelpARCCoreClassMemberEnables explanation of syntax in different contexts from one source:
ARCCore.IKString.FromCacheARCCoreClassMemberReduces number of objects generated by caching those known to be within a limited range
ARCCore.ParseResultARCCoreClassNOTE: Concept is very old, from the dark ages of AgoRapide's very first inception. There might be room for improvement.
ARCCore.IKType.ToStringARCCoreClassMemberCaching is supposed to be useful because may be called quite often.
ARCCore.PK.ToStringARCCoreClassMemberCaching is supposed to be useful because may be called quite often.
ARCCore.ITypeDescriberARCCoreClassProvides a standardized mechanism for describing single-property values (like 'PhoneNumber' of 'Customer' for instance).
ARCCore.PK.TryValidateAndParseARCCoreClassMemberParses the value according to specifications for this property key.
ARCCore.PK.TryGetVARCCoreClassMemberOnly type of PK, string or type of __enum is allowed to ask for (as TRequest generic type parameter).
ARCCore.PK.GetAllPKForEntityTypeStringARCCoreClassMemberReturns all property keys relevant for the given entity type,
ARCCore.PK.GetAARCCoreClassMemberConvenience method for easy access to -BasePKAttribute- with corresponding explaining exception if fails
ARCCore.PK.BuildFromStringCacheARCCoreClassMemberBuilds the content of -_fromStringCache- and also -_allPKForEntityTypeCache-.
ARCCore.PK.TryGetFromTypeAndFieldName Overload3ARCCoreClassMemberReturns property key based on type and field name.
ARCCore.PK.ValidatorAndParserARCCoreClassMemberValidates and parses a value.
ARCCore.PK.TryGetFromTypeAndFieldName Overload2ARCCoreClassMemberReturns property key based on type and field name.
ARCCore.PK.CleanerARCCoreClassMemberCleanup of values, to be used before value is attempted validated.
ARCCore.PK.GetTypeMappingARCCoreClassMemberReturns the relevant property key for a given type entity-type and field-type.
ARCCore.PKHTMLAttribute.EncodeARCCoreClassMemberEncodes the given string to HTML format through the static method implemented in class -Encoder-.
ARCCore.PK.GetObligatoryValuesForEntityTypeARCCoreClassMemberReturns all obligatory values (based on -IsObligatory-)
ARCCore.PKHTMLAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PK.EqualsARCCoreClassMemberNote that ToString is only based on __enum, meaning that two enum members / enum values with same name but different type, like CustomerP.Name and OrderP.Name, will be considered equal.
ARCCore.PKHTMLAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.PK.TryGetPARCCoreClassMemberMade virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway.
ARCCore.PKHTMLAttribute.EncoderARCCoreClassMemberSee -Encoder-.
ARCCore.PKHTMLAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PKRelAttribute.EnforceReferentialIntegrityARCCoreClassMemberSee -EnforceReferentialIntegrity-.
ARCCore.IHTMLEncoderARCCoreClassPseudo-interface signifying that implementing class has a static metod called 'Encode' for encoding a string to HTML.
ARCCore.PKRelAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PKLogAttributeARCCoreClassExplains how logging of changes to a property should be done.
ARCCore.PKTypeAttributeARCCoreClassContains the most basic essential information about a property key, like its description, -Type-, -Cardinality-, -IsObligatory- and -DefaultValue-.
ARCCore.PKLogAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PKTypeAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.IPARCCoreClassIP = IProperty.
ARCCore.IP.LogARCCoreClassMemberThe 'final' overload of -Log- that is called by the other overloads.
ARCCore.IP.TryGetV Overload2ARCCoreClassMemberThe actual value of the property. Mostly relevant for single-value properties like -PValue-.
ARCCore.IP.LogExecuteTimeARCCoreClassMemberTimes the execution of the given function and logs details about elapsed time.
ARCCore.IP.IncARCCoreClassMemberIncrements given property key by 1. Sets to 1 if not found. Uses long, not integer.
ARCCore.IP.HandleExceptionARCCoreClassMemberNote that most relevant to use for -PConcurrent-.
ARCCore.IP.DecARCCoreClassMemberDecrements given property key by 1. Sets to -1 if not found. Uses long, not integer.
ARCCore.IP.TryParseDtrARCCoreClassMemberParses a PropertyStreamLine- beginning with -dtr-.
ARCCore.IP.ToPropertyStreamARCCoreClassMemberTurns object into a -PropertyStream-
ARCCore.IP.TryGetV Overload1ARCCoreClassMemberThe actual 'unpacking' of the object.
ARCCore.IP.ToJSONSerializeableARCCoreClassMemberPrepares the data into a format acceptable for System.Text.Json.JsonSerializer.Serialize.
ARCCore.IP.DeepCopyARCCoreClassMemberCreates a deep copy of this object instance, that is, a copy with all new object instances (except for immutable objects).
ARCCore.IP.GetValueForJSONSerializerARCCoreClassMemberPractical approach to serializing of -IP- based values to JSON.
ARCCore.IP.AddPV Overload2ARCCoreClassMemberNOTE: The different AddPV / AddP overloads should only be used if you want an assertion against the
ARCCore.IP.TrySetPARCCoreClassMemberSet property regardless of whether exists or not.
ARCCore.IP.AddPV Overload1ARCCoreClassMemberAdds a property value (as a -PValue-) for this objectThrows -KeyAlreadyExistsException- when relevant.
ARCCore.IP.TryGetPVARCCoreClassMemberGets a single property's value for the given property key.
ARCCore.IP.AllIPDerivedTypesDictIKTypeARCCoreClassMemberSame as -AllIPDerivedTypesDict- except that value is -IKType-, not string.
ARCCore.IP.IsValidARCCoreClassMemberNote that by default all properties are 'valid' but because of -NoRealDeletion-, we must have a mechanism for invalidating properties. This property returns FALSE if property has been invalidated and timestamp for invalidation is not '0001-01-01'.
ARCCore.PARCCoreClass'Dummy'-class, not necessarily in use. See -PP- for more information. Created because of the concept of CorrespondingClass which is strictly enforced
ARCCore.IP.ItemARCCoreClassMemberOffers string-based direct indexing.
ARCCore.P.TryGetPARCCoreClassMemberMade virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway.
ARCCore.IP.KeysARCCoreClassMemberReturns all the keys for this instance.
ARCCore.P.TryGetVARCCoreClassMemberNote that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.PCollection.GetKeysEqualToValueARCCoreClassMemberReturns properties which themselves again have key and value equal to the given key and value.
ARCCore.PExact<TEnumType>.SetPVDirectARCCoreClassMemberHigh performance alternative to -TrySetP-, accessing -Storage- more direct.
ARCCore.PCollection.TryGetPARCCoreClassMemberMade virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway.
ARCCore.PExact<TEnumType>.GetPVDirectARCCoreClassMemberHigh performance alternative to -TryGetP-, accessing -Storage- more direct.
ARCCore.PCollection.TryGetVARCCoreClassMemberNote that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.PExact<TEnumType>.TryGetPVDirectARCCoreClassMemberHigh performance alternative to -TryGetP-, accessing -Storage- more direct.
ARCCore.PCollection.ToStringARCCoreClassMemberTODO: Decide on what we actually want with ToString for this class.
ARCCore.PExact<TEnumType>.ToStringARCCoreClassMemberTODO: Decide on what we actually want with ToString for this class.
ARCCore.PII.TryGetPARCCoreClassMemberMade virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway.
ARCCore.IIKII.PackParseResultForStorageInIKIIARCCoreClassMemberThis method corresponds to -PackParseResultForStorageInEntityObject-.
ARCCore.PII.ToStringARCCoreClassMemberTODO: Decide on what we actually want with ToString for this class.
ARCCore.IIKII.PackObjectForStorageInIKIIARCCoreClassMemberThis method corresponds to -PackObjectForStorageInEntityObject-.
ARCCore.IPIIARCCoreClassFuture expansion, using different classes for storing, not only -PII-.
ARCCore.PReadOnlyARCCoreClassExperimental (from Feb 2022) class suitable for classes that do not need to be deserialized, or to accept write requests through -PropertyAccess-.
ARCCore.IIKIIARCCoreClassRelated to -PII-, property for storing individual items
ARCCore.PRichARCCoreClassFully flexible storage. Can store anything. Typical inherited for entity representations like 'Customer' or 'Order'.
ARCCore.PValueEmpty.ToPropertyStreamARCCoreClassMemberTypicall return value could be something like
ARCCore.ActualConnection.SetUpToDatePositionGeneratorARCCoreClassMemberSet by -StreamProcessor-. Not used by -Client-.
ARCCore.ActualConnectionARCCoreClassThe actual connection, its internal state, queue for sending and so on.
ARCCore.ActualConnection.InitializeOutgoingConnectionARCCoreClassMemberRelevant for -Outgoing-.
ARCCore.ActualConnection.SetMyUpdatePositionGeneratorARCCoreClassMemberSet by -StreamProcessor-.
ARCCore.ActualConnection.CommunicateARCCoreClassMemberCommon for both -Incoming- and -Outgoing-.
ARCCore.ActualConnection.SetSinglePropertyStreamReceiverARCCoreClassMemberSet by -StreamProcessor-.
ARCCore.ActualConnection.LogAndSendErrorConditionDataARCCoreClassMemberCalled when a serious error condition has been discovered and connection should be terminated.
ARCCore.ClientUpdatePosition.OnlyNewDataIsRequestedARCCoreClassMemberUsed by the subscribing client to signify that it does not care about historical data, the server may start with sending only new data.
ARCCore.ConnectionInstruction.TryGetVARCCoreClassMemberNote that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.ClientUpdatePosition.IsGoBackARCCoreClassMemberHas to be translated by -StreamProcessor- into a concrete filename / index.
ARCCore.ConnectionInstruction.ToStringARCCoreClassMemberTODO: Decide on what we actually want with ToString for this class.
ARCCore.ClientUpdatePosition.IsAtEndOfStreamARCCoreClassMemberNecessary in order to implement -AdHocQuery-.
ARCCore.ShardingARCCoreClassEnables load-balancing by describing what data should be sent over a given connection.
ARCCore.ClientUpdatePosition.ClientDatastoreIsEmptyInstanceARCCoreClassMemberSee also -ClientDatastoreIsEmpty.
ARCCore.PropertyStreamLineARCCoreClassHas two main functions:
ARCCore.ClientUpdatePosition.OnlyNewDataIsRequestedInstanceARCCoreClassMemberSee also -OnlyNewDataIsRequested.
ARCCore.PropertyStreamLine.EncodeKeysARCCoreClassMemberEncodes the key part of a -PropertyStreamLine-.
ARCCore.ConnectionInstructionARCCoreClassThe instruction about what connections to make (host, portnr, data transfer direction and so on).
ARCCore.PropertyStreamLine.EncodeValuesARCCoreClassMemberTypically used when turning -WholeCollection- into a value part of a -PropertyStreamLine-.
ARCCore.ConnectionInstruction.InitializeARCCoreClassMemberInitializes to sane values.
ARCCore.PropertyStreamLine.EncodeKeyPartARCCoreClassMemberConverts a single key part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-.
ARCCore.ConnectionInstruction.TryGetPARCCoreClassMemberMade virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway.
ARCCore.PropertyStreamLine.EncodeValuePartARCCoreClassMemberConverts a single value part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-.
ARCCore.PropertyStreamLine.AllowedKeyCharsARCCoreClassMemberAllowed characters in the Key-part of a -PropertyStreamLine-.
ARCCore.PropertyStreamLine.AllowedValueCharsARCCoreClassMemberAllowed characters in the Value-part of a -PropertyStreamLine-.
ARCCore.PropertyStreamLineParsedARCCoreClassParses the keys part of a line from -PropertyStream-, like 'Customer/42/FirstName = John.
ARCCore.PropertyStreamLineParsed.ToStringARCCoreClassMemberNote relatively complex operation of 'restoring' original property stream line.
ARCCore.PropertyStreamLineParsed.TryParseARCCoreClassMemberGenerate list of <(IK key, Type valueType)> together with value from value part.
ARCCore.PropertyStreamLineParsed.IsCommentARCCoreClassMemberSignifies that property stream line given for parsing started with '//' (two forward slashes).
ARCCore.PropertyStreamLineParsed.KeysARCCoreClassMemberThe keys part of the -PropertyStreamLine-, that is, everything before ' = '.
ARCCore.PropertyStreamLineParsed.ValueARCCoreClassMemberThe original (non-parsed, non-validated)) value part of the -PropertyStreamLine-, that is, everything after ' = '.
ARCCore.Subscription.SyntaxHelpARCCoreClassMember'+*' Subscribe to everything in database.
ARCCore.Subscription.IsAddARCCoreClassMemberCorresponds to whether value starts with a plus sign, '+' or not.
ARCCore.Subscription.IsRemoveARCCoreClassMemberCorresponds to whether value starts with a minus sign, '+' or not.
ARCCore.UtilCoreARCCoreClassUtility methods for -ARCCore-.

Generated 2026-08-21 03:52:31.058 UTC