[ROOT]  doc  DocFrag  SELECT Assembly, DocFragType, Description.FirstLine()   <  SKIP 16  >   <  TAKE 128  >   

128 items

DocFragIdAssemblyDocFragTypeDescription.FirstLine()
ARCCore.ExtensionsARCCoreClassContains a few general nice to have extensions methods.
ARCCore.Extensions.UseARCCoreClassMemberConvenience method that shortens down code in cases where an instance of an object must be created first in order to use that same variable multiple times
ARCCore.Extensions.AddValueARCCoreClassMemberGives better error messages compared to 'original' Add when adding a value to a directory if key already exists
ARCCore.Extensions.ToStringDateAndTimeARCCoreClassMemberUses format 'yyyy-MM-dd HH:mm:ss.fff'.
ARCCore.Extensions.ToStringWithMSARCCoreClassMemberUses either format 'd\.hh\:mm\:ss\.fff' or 'hh\:mm\:ss\.fff' depending on TotalHours >=24 hours or not.
ARCCore.IKIP.TryAssertTypeIntegrityARCCoreClassMemberAsserts that value is of correct type as specified by the key.
ARCCore.IKARCCoreClassIK = Interface Key / Index key. Key used to lookup 'inside' an instance of -IP-.
ARCCore.IKCoded.FromCacheUnencodedARCCoreClassMemberReduces number of objects generated by caching those known to be within a limited range
ARCCore.IKCoded.FromEncodedARCCoreClassMemberNote how uses instance cache if already exists there.
ARCCore.IKDateARCCoreClassA more memory efficient alternative to -IKString- (together with -IKLong-).
ARCCore.IKDate.op_EqualityARCCoreClassMemberIt is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here.
ARCCore.IKDate.EnrichKeyARCCoreClassMember'Implementing' -ITypeDescriber-.
ARCCore.IKDate.ValidDateTimeFormatsARCCoreClassMemberNote: Be very careful about expanding this array. ToString must be considered, and also how Equals should work with other sub classes of IK.
ARCCore.ITypeDescriberARCCoreClassProvides a standardized mechanism for describing single-property values (like 'PhoneNumber' of 'Customer' for instance).
ARCCore.ITypeDescriber.GetSyntaxHelpARCCoreClassMemberEnables explanation of syntax in different contexts from one source:
ARCCore.ParseResultARCCoreClassNOTE: Concept is very old, from the dark ages of AgoRapide's very first inception. There might be room for improvement.
ARCCore.ParseResult.ResultARCCoreClassMemberWill be null if ErrorResponse is set.
ARCCore.PK.TryValidateAndParseARCCoreClassMemberParses the value according to specifications for this property key.
ARCCore.PK.TryCleanValidateAndParseARCCoreClassMemberCleans and parses the value according to specifications for this property key.
ARCCore.PK.PackParseResultForStorageInEntityObjectARCCoreClassMemberPacks result of parsing into a -IP--derived class, suitable for sending to -AddOrUpdateP-.
ARCCore.PK.PackObjectForStorageInEntityObjectARCCoreClassMemberSee -PackParseResultForStorageInEntityObject- for documentation.
ARCCore.PK.CorrespondingClassARCCoreClassMemberReturns -CorrespondingClass- based on -__enum-.
ARCCore.PK.ValidatorAndParserARCCoreClassMemberValidates and parses a value.
ARCCore.PK.CleanerARCCoreClassMemberCleanup of values, to be used before value is attempted validated.
ARCCore.PK.AllEnumsARCCoreClassMemberAll enums for the whole application.
ARCCore.IHTMLEncoderARCCoreClassPseudo-interface signifying that implementing class has a static metod called 'Encode' for encoding a string to HTML.
ARCCore.PKLogAttributeARCCoreClassExplains how logging of changes to a property should be done.
ARCCore.PKLogAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PKLogAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.PKRelAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PKTypeAttributeARCCoreClassContains the most basic essential information about a property key, like its description, -Type-, -Cardinality-, -IsObligatory- and -DefaultValue-.
ARCCore.PKTypeAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PKTypeAttribute.StandardValidatorAndParserARCCoreClassMemberReturns validator and parser for well known types like string, int, long, bool, DateTime, TimeSpan, Type, Uri.
ARCCore.IPARCCoreClassIP = IProperty.
ARCCore.IP.TryGetV Overload2ARCCoreClassMemberThe actual value of the property. Mostly relevant for single-value properties like -PValue-.
ARCCore.IP.IncARCCoreClassMemberIncrements given property key by 1. Sets to 1 if not found. Uses long, not integer.
ARCCore.IP.DecARCCoreClassMemberDecrements given property key by 1. Sets to -1 if not found. Uses long, not integer.
ARCCore.IP.ToStringARCCoreClassMemberThe ToString()-implementation in the classes implementing this interface is supposed to give a short concise representation of the object for debugging and logging purposes, that is, intended for human consumption. The most 'important' implementation is probably the one in -PRich- (-ToString-) because that one is often the basis for your entity classes like 'Customer', 'Order' and so on
ARCCore.IP.TrySetPPARCCoreClassMemberSetPP = set property of property. Sets property of entity contained within this class.
ARCCore.IP.GetKeysEqualToValueARCCoreClassMemberReturns properties which themselves again have key and value equal to the given key and value.
ARCCore.IP.OnTrySetPARCCoreClassMemberEvent handler to be called by -TrySetP- before it changes a property value (but AFTER it has done any validity checks, that is, after it has 'decided' to return TRUE, in other words, event handler should be called when change is guaranteed to go through, but before it actually has been done).
ARCCore.IP.GetOrAddPVARCCoreClassMemberGets value. If not set then value will be added
ARCCore.IP.GetPVARCCoreClassMemberGets a single property's value for this object. Returns default value if not successful.
ARCCore.IP.TryGetPVARCCoreClassMemberGets a single property's value for the given property key.
ARCCore.IP.IsValidARCCoreClassMemberNote that by default all properties are 'valid' but because of -NoRealDeletion-, we must have a mechanism for invalidating properties. This property returns FALSE if property has been invalidated and timestamp for invalidation is not '0001-01-01'.
ARCCore.IP.ItemARCCoreClassMemberOffers string-based direct indexing.
ARCCore.IP.KeysARCCoreClassMemberReturns all the keys for this instance.
ARCCore.IP.ValuesARCCoreClassMemberReturns all the values (all the properties) for this instance.
ARCCore.IP.LoggerARCCoreClassMemberDescribes a logger.
ARCCore.BasePKAttributeARCCoreClassThe class containing the actual attributes used for -TaggingOfPropertyKeys-.
ARCCore.EnumAttributeARCCoreClassDescribes an enum.
ARCCore.EnumAttribute.TryGetAsTypeScriptARCCoreClassMemberGenerates typescript code corresponding to the enum which this instance describes.
ARCCore.EnumMemberAttribute.GetAttributeARCCoreClassMemberNote that illegal to call for -PropertyKeyEnum-.
ARCCore.EnumMemberAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.Extensions.ToStringShortARCCoreClassMemberReturns a shorter representation than -ToStringDB-.
ARCCore.Extensions.ForEachARCCoreClassMemberUseful when we want to write collection.ForEach( ... ) instead of
ARCCore.Extensions.KeysAsStringARCCoreClassMemberGives a compressed overview of keys in a dictionary. Helpful for building exception messages.
ARCCore.Extensions.SingleOrDefaultARCCoreClassMemberSame as inbuilt LINQ's SingleOrDefault except that gives a more friendly exception message
ARCCore.Extensions.ResultARCCoreClassMemberReturns heading plus return-value of function (calls function). If function == null then empty string is returned
ARCCore.IKCodedARCCoreClassUnderstands coded and unencoded variants of -IK-.
ARCCore.IKCoded.EnrichKeyARCCoreClassMember'Implementing' -ITypeDescriber-.
ARCCore.IKCoded.TryEncodeARCCoreClassMemberReturns a string containing only characters in -AllowedEncodedCharacters-.
ARCCore.IKCoded.ToStringARCCoreClassMemberReturns -Encoded-'s string representation.
ARCCore.IKLong.EnrichKeyARCCoreClassMember'Implementing' -ITypeDescriber-.
ARCCore.IKStringARCCoreClassIndex key for any general id, like primary-key or sequence-number or similar.
ARCCore.IKString.FromCacheARCCoreClassMemberReduces number of objects generated by caching those known to be within a limited range
ARCCore.IKString.FromStringARCCoreClassMemberNote how uses instance cache if already exists there
ARCCore.ParseResult.ErrorResponseARCCoreClassMemberWill be null if Result is set
ARCCore.PKARCCoreClassPK = AgoRapide PropertyKey.
ARCCore.PK.TryGetEnumARCCoreClassMemberNote that usually you will not have to ask for this value, usually in AgoRapide it goes the other way around, you have the enum member / enum value and want the corresponding property key.
ARCCore.PK.TryGetVARCCoreClassMemberOnly type of PK, string or type of __enum is allowed to ask for (as TRequest generic type parameter).
ARCCore.PK.FromEnumARCCoreClassMemberReturns the corresponding -PK- instance from the given -PropertyKeyEnum-.
ARCCore.PK.TryGetFromTypeAndFieldName Overload3ARCCoreClassMemberReturns property key based on type and field name.
ARCCore.PK.BuildFromStringCacheARCCoreClassMemberBuilds the content of -_fromStringCache- and also -_allPKForEntityTypeCache-.
ARCCore.PK.GetTypeMappingARCCoreClassMemberReturns the relevant property key for a given type entity-type and field-type.
ARCCore.PK.GetObligatoryValuesForEntityTypeARCCoreClassMemberReturns all obligatory values (based on -IsObligatory-)
ARCCore.PK.EqualsARCCoreClassMemberNote that ToString is only based on __enum, meaning that two enum members / enum values with same name but different type, like CustomerP.Name and OrderP.Name, will be considered equal.
ARCCore.PK.AllPKEnumsARCCoreClassMemberAll -PropertyKeyEnum--tagged enums for the whole application.
ARCCore.PK.__enumARCCoreClassMemberThis information is also found as EnumMember.
ARCCore.PKHTMLAttributeARCCoreClassContains pointer to HTML encoder for a property.
ARCCore.PKHTMLAttribute.EncodeARCCoreClassMemberEncodes the given string to HTML format through the static method implemented in class -Encoder-.
ARCCore.PKLogAttribute.DoNotLogAtAllARCCoreClassMemberSee -DoNotLogAtAll-.
ARCCore.PKLogAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PKRelAttributeARCCoreClassDescribes relationships between entities (between tables in RDBMS terms).
ARCCore.PKRelAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.IP.HandleExceptionARCCoreClassMemberNote that most relevant to use for -PConcurrent-.
ARCCore.IP.TryParseDtrARCCoreClassMemberParses a PropertyStreamLine- beginning with -dtr-.
ARCCore.IP.InitializeARCCoreClassMemberNote that has a default implementation (doing nothing).
ARCCore.IP.AssertIntegrityARCCoreClassMemberSee -TryAssertIntegrity-.
ARCCore.IP.GetValueForJSONSerializerARCCoreClassMemberPractical approach to serializing of -IP- based values to JSON.
ARCCore.IP.TrySetPARCCoreClassMemberSet property regardless of whether exists or not.
ARCCore.IP.TryGetV Overload1ARCCoreClassMemberThe actual 'unpacking' of the object.
ARCCore.IP.DeepCopyARCCoreClassMemberCreates a deep copy of this object instance, that is, a copy with all new object instances (except for immutable objects).
ARCCore.IP.AllIPDerivedTypesARCCoreClassMemberAll relevant -IP--derived types for the whole application.
ARCCore.IP.AllIPDerivedTypesWithPKEnumARCCoreClassMemberAll relevant -IP--derived types for the whole application for which the also is defined a -PropertyKeyEnum-.
ARCCore.IP.AllIPDerivedTypesWithPKEnumApplicationSpecificARCCoreClassMemberAll relevant -IP--derived types for the -ApplicationSpecificCode- part of the application for which also is defined a -PropertyKeyEnum-.
ARCCore.IP.AllIPDerivedEntityCollectionClassesDictARCCoreClassMemberAll -IP--derived types for which is found a corresponding class with name like '{EntityType}Collection'
ARCCore.P.ToStringARCCoreClassMemberTODO: Decide on what we actually want with ToString for this class.
ARCCore.ICreatedARCCoreClassA dummy interface signifying that implementing class has the ability to store (in-memory) metadata -Created-
ARCCore.PCollectionARCCoreClassA class useful for storing a collection of entities (a table in RDBMS-terms) because it implements -Indexing-.
ARCCore.PCollection.TrySetPPARCCoreClassMemberReplaces default interface method -TrySetPP-.
ARCCore.ClientUpdatePosition.OnlyNewDataIsRequestedInstanceARCCoreClassMemberSee also -OnlyNewDataIsRequested.
ARCCore.ConnectionInstructionARCCoreClassThe instruction about what connections to make (host, portnr, data transfer direction and so on).
ARCCore.ConnectionInstruction.InitializeARCCoreClassMemberInitializes to sane values.
ARCCore.ConnectionInstruction.TryGetPARCCoreClassMemberMade virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway.
ARCCore.PropertyStreamLine.EncodeKeysARCCoreClassMemberEncodes the key part of a -PropertyStreamLine-.
ARCCore.PropertyStreamLine.EncodeValuesARCCoreClassMemberTypically used when turning -WholeCollection- into a value part of a -PropertyStreamLine-.
ARCCore.PropertyStreamLine.EncodeKeyPartARCCoreClassMemberConverts a single key part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-.
ARCCore.PropertyStreamLine.EncodeValuePartARCCoreClassMemberConverts a single value part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-.
ARCCore.PropertyStreamLine.DecodeARCCoreClassMemberDecodes string as encoded by -EncodeKeyPart- or -EncodeValuePart-.
ARCCore.PropertyStreamLine.TryParseDirectToIPARCCoreClassMemberParses a series of -PropertyStreamLine- directly to the given type of -IP-.
ARCCore.PropertyStreamLine.TryParseDirectToPropertyARCCoreClassMemberParses direct to a given property value.
ARCCore.PropertyStreamLine.ParseAndStoreARCCoreClassMemberNote that throws exception if -TryParseAndStore- fails.
ARCCore.ClassAttribute.GetAttributeARCCoreClassMemberThrows exception if type implements -IP- and no corresponding enum found (enum ending with capital letter 'P' (like 'CustomerP' for enum describing class 'Customer' for instance)
ARCCore.BaseAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.PKTypeAttribute.StandardCleanerARCCoreClassMemberReturns a cleaner for well known types like bool
ARCCore.BaseAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PKTypeAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.BasePKAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PKTypeAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.ClassAttributeARCCoreClassDescribes a class.
ARCCore.IP.LogARCCoreClassMemberThe 'final' overload of -Log- that is called by the other overloads.
ARCCore.ClassAttribute.TryGetAsTypeScriptARCCoreClassMemberGenerates typescript code corresponding to the class which this instance describes.
ARCCore.IP.LogExecuteTimeARCCoreClassMemberTimes the execution of the given function and logs details about elapsed time.
ARCCore.ClassAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.IP.TryAssertIntegrityARCCoreClassMemberAsserts the integrity of this entity.
ARCCore.ClassMemberAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.IP.TryGetPARCCoreClassMemberGets a single property for this object

Generated 2026-06-11 13:37:01.376 UTC