[ROOT] doc DocFrag SELECT Assembly, DocFragType, Description.FirstLine() < SKIP 21 > < TAKE 224 >
224 items
| DocFragId | Assembly | DocFragType | Description.FirstLine() |
|---|---|---|---|
| ARCCore.ClassMemberAttribute | ARCCore | Class | Describes a member of a class (a method). |
| ARCCore.EnumMemberAttribute | ARCCore | Class | Describes an enum's value. |
| ARCCore.EnumMemberAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.EnumAttribute | ARCCore | Class | Describes an enum. |
| ARCCore.ClassMemberAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.EnumMemberAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.Extensions.ToStringShort | ARCCore | ClassMember | Returns a shorter representation than -ToStringDB-. |
| ARCCore.EnumAttribute.TryGetAsTypeScript | ARCCore | ClassMember | Generates typescript code corresponding to the enum which this instance describes. |
| ARCCore.EnumAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.Extensions | ARCCore | Class | Contains a few general nice to have extensions methods. |
| ARCCore.Extensions.ForEach | ARCCore | ClassMember | Useful when we want to write collection.ForEach( ... ) instead of |
| ARCCore.EnumMemberAttribute.GetAttribute | ARCCore | ClassMember | Note that illegal to call for -PropertyKeyEnum-. |
| ARCCore.CardinalityExtensions | ARCCore | Class | |
| ARCCore.Extensions.ToStringVeryShort | ARCCore | ClassMember | Returns same as -ToStringShort- but without any generics information at all. |
| ARCCore.Extensions.Single | ARCCore | ClassMember | Same as inbuilt LINQ's Single except that gives a more friendly exception message |
| ARCCore.EnumMemberAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.CardinalityExtensions.IsMultiple | ARCCore | ClassMember | Returns TRUE if given cardinality implies that multiple items are stored simultaneously in a typical in-memory data storage. |
| ARCCore.Extensions.ToStringDB | ARCCore | ClassMember | Gives the minimum representation of type as string suitable for later reconstruction by -GetType-. |
| ARCCore.Extensions.SingleOrDefault | ARCCore | ClassMember | Same as inbuilt LINQ's SingleOrDefault except that gives a more friendly exception message |
| ARCCore.IPAttribute | ARCCore | Class | Describes -IP- classes (describes at class-level) |
| ARCCore.Extensions.Use | ARCCore | ClassMember | Convenience method that shortens down code in cases where an instance of an object must be created first in order to use that same variable multiple times |
| ARCCore.Extensions.Result | ARCCore | ClassMember | Returns heading plus return-value of function (calls function). If function == null then empty string is returned |
| ARCCore.IK | ARCCore | Class | IK = Interface Key / Index key. Key used to lookup 'inside' an instance of -IP-. |
| ARCCore.Extensions.KeysAsString | ARCCore | ClassMember | Gives a compressed overview of keys in a dictionary. Helpful for building exception messages. |
| ARCCore.Extensions.AddValue | ARCCore | ClassMember | Gives better error messages compared to 'original' Add when adding a value to a directory if key already exists |
| ARCCore.Extensions.ToStringDateAndTime | ARCCore | ClassMember | Uses format 'yyyy-MM-dd HH:mm:ss.fff'. |
| ARCCore.IKCoded | ARCCore | Class | Understands coded and unencoded variants of -IK-. |
| ARCCore.Extensions.GetValue | ARCCore | ClassMember | Gives better error messages when reading value from directory if key does not exist |
| ARCCore.Extensions.ToStringWithMS | ARCCore | ClassMember | Uses either format 'd\.hh\:mm\:ss\.fff' or 'hh\:mm\:ss\.fff' depending on TotalHours >=24 hours or not. |
| ARCCore.IKCoded.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
| ARCCore.IKCoded.ToString | ARCCore | ClassMember | Returns -Encoded-'s string representation. |
| ARCCore.IKIP.AssertTypeIntegrity | ARCCore | ClassMember | See -TryAssertTypeIntegrity- for documentation. |
| ARCCore.IKIP | ARCCore | Class | Container class for key (-IK-), and value (-IP-). |
| ARCCore.IKCoded.TryCheckValidEncodedValue | ARCCore | ClassMember | Checks if encoded value is valid. |
| ARCCore.IKCoded.Encoded | ARCCore | ClassMember | This string value can be used directly in folder names, file names and HTTP URL's without any further encoding being necessary. |
| ARCCore.IKIP.TryAssertTypeIntegrity | ARCCore | ClassMember | Asserts that value is of correct type as specified by the key. |
| ARCCore.IKCoded.FromEncoded | ARCCore | ClassMember | Note how uses instance cache if already exists there. |
| ARCCore.IKCoded.AllowedEncodedCharacters | ARCCore | ClassMember | The character set 'A...Za...z0...9-_().,='. |
| ARCCore.IKDate.ValidDateTimeFormats | ARCCore | ClassMember | Note: Be very careful about expanding this array. ToString must be considered, and also how Equals should work with other sub classes of IK. |
| ARCCore.IKCoded.FromCacheEncoded | ARCCore | ClassMember | Reduces number of objects generated by caching those known to be within a limited range |
| ARCCore.IKCoded.TryEncode | ARCCore | ClassMember | Returns a string containing only characters in -AllowedEncodedCharacters-. |
| ARCCore.IKDate | ARCCore | Class | A more memory efficient alternative to -IKString- (together with -IKLong-). |
| ARCCore.IKLong | ARCCore | Class | A more memory efficient alternative to -IKString-. |
| ARCCore.IKCoded.FromCacheUnencoded | ARCCore | ClassMember | Reduces number of objects generated by caching those known to be within a limited range |
| ARCCore.PK | ARCCore | Class | PK = AgoRapide PropertyKey. |
| ARCCore.IKLong.op_Equality | ARCCore | ClassMember | It is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here. |
| ARCCore.IKString.FromString | ARCCore | ClassMember | Note how uses instance cache if already exists there |
| ARCCore.IKDate.op_Equality | ARCCore | ClassMember | It is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here. |
| ARCCore.PK.TryGetEnum | ARCCore | ClassMember | Note that usually you will not have to ask for this value, usually in AgoRapide it goes the other way around, you have the enum member / enum value and want the corresponding property key. |
| ARCCore.IKLong.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
| ARCCore.IKString.op_Equality | ARCCore | ClassMember | It is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here. |
| ARCCore.IKDate.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
| ARCCore.PK.TryCleanValidateAndParse | ARCCore | ClassMember | Cleans and parses the value according to specifications for this property key. |
| ARCCore.IKString.EnrichKey | ARCCore | ClassMember | 'Implementing' -ITypeDescriber-. |
| ARCCore.ITypeDescriber.GetSyntaxHelp | ARCCore | ClassMember | Enables explanation of syntax in different contexts from one source: |
| ARCCore.IKString | ARCCore | Class | Index key for any general id, like primary-key or sequence-number or similar. |
| ARCCore.PK.PackParseResultForStorageInEntityObject | ARCCore | ClassMember | Packs result of parsing into a -IP--derived class, suitable for sending to -AddOrUpdateP-. |
| ARCCore.IKType | ARCCore | Class | Index key used when storing a collection of a given type, like 'Customer'. |
| ARCCore.ParseResult | ARCCore | Class | NOTE: Concept is very old, from the dark ages of AgoRapide's very first inception. There might be room for improvement. |
| ARCCore.IKString.FromCache | ARCCore | ClassMember | Reduces number of objects generated by caching those known to be within a limited range |
| ARCCore.PK.Equals | ARCCore | ClassMember | Note that ToString is only based on __enum, meaning that two enum members / enum values with same name but different type, like CustomerP.Name and OrderP.Name, will be considered equal. |
| ARCCore.ParseResult.Result | ARCCore | ClassMember | Will be null if ErrorResponse is set. |
| ARCCore.PK.TryGetA | ARCCore | ClassMember | Convenience method for easy access to -BasePKAttribute-. |
| ARCCore.IKType.ToString | ARCCore | ClassMember | Caching is supposed to be useful because may be called quite often. |
| ARCCore.PK.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.ParseResult.ErrorResponse | ARCCore | ClassMember | Will be null if Result is set |
| ARCCore.PK.ModifyCleanerAndValidatorAndParserForCardinality | ARCCore | ClassMember | Called from -Initialize- after _cleaner and _validatorAndParser have been set. |
| ARCCore.ITypeDescriber | ARCCore | Class | Provides a standardized mechanism for describing single-property values (like 'PhoneNumber' of 'Customer' for instance). |
| ARCCore.PK.ValidatorAndParser | ARCCore | ClassMember | Validates and parses a value. |
| ARCCore.PK.ToString | ARCCore | ClassMember | Caching is supposed to be useful because may be called quite often. |
| ARCCore.PK.PackObjectForStorageInEntityObject | ARCCore | ClassMember | See -PackParseResultForStorageInEntityObject- for documentation. |
| ARCCore.PK.TryGetV | ARCCore | ClassMember | Only type of PK, string or type of __enum is allowed to ask for (as TRequest generic type parameter). |
| ARCCore.PK.Cleaner | ARCCore | ClassMember | Cleanup of values, to be used before value is attempted validated. |
| ARCCore.PK.TryValidateAndParse | ARCCore | ClassMember | Parses the value according to specifications for this property key. |
| ARCCore.PK.FromEnum | ARCCore | ClassMember | Returns the corresponding -PK- instance from the given -PropertyKeyEnum-. |
| ARCCore.PK.GetA | ARCCore | ClassMember | Convenience method for easy access to -BasePKAttribute- with corresponding explaining exception if fails |
| ARCCore.PKLogAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.PK.GetAllPKForEntityTypeString | ARCCore | ClassMember | Returns all property keys relevant for the given entity type, |
| ARCCore.PK..ctor | ARCCore | ClassMember | Constructor with 'object _enum' is necessary in order for ToString to work. |
| ARCCore.PK.TryGetFromTypeAndFieldName Overload3 | ARCCore | ClassMember | Returns property key based on type and field name. |
| ARCCore.PKLogAttribute.DoNotLogAtAll | ARCCore | ClassMember | See -DoNotLogAtAll-. |
| ARCCore.PK.BuildFromStringCache | ARCCore | ClassMember | Builds the content of -_fromStringCache- and also -_allPKForEntityTypeCache-. |
| ARCCore.PK.Type | ARCCore | ClassMember | Returns type from -PKTypeAttribute-'s -Type-. |
| ARCCore.PK.TryGetFromTypeAndFieldName Overload2 | ARCCore | ClassMember | Returns property key based on type and field name. |
| ARCCore.PKLogAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.PK.GetTypeMapping | ARCCore | ClassMember | Returns the relevant property key for a given type entity-type and field-type. |
| ARCCore.PK.Cardinality | ARCCore | ClassMember | Returns cardinality from -PKTypeAttribute-'s -Cardinality-. |
| ARCCore.PK.TryGetFromTypeAndFieldName Overload1 | ARCCore | ClassMember | Returns property key based on type and field name. |
| ARCCore.PKRelAttribute | ARCCore | Class | Describes relationships between entities (between tables in RDBMS terms). |
| ARCCore.PK.GetObligatoryValuesForEntityType | ARCCore | ClassMember | Returns all obligatory values (based on -IsObligatory-) |
| ARCCore.PK.CorrespondingClass | ARCCore | ClassMember | Returns -CorrespondingClass- based on -__enum-. |
| ARCCore.PK.GetAllPKForEntityType | ARCCore | ClassMember | Returns all property keys relevant for the given entity type, |
| ARCCore.PKTypeAttribute.StandardValidatorAndParser | ARCCore | ClassMember | Returns validator and parser for well known types like string, int, long, bool, DateTime, TimeSpan, Type, Uri. |
| ARCCore.PK.AllEnums | ARCCore | ClassMember | All enums for the whole application. |
| ARCCore.PKHTMLAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.PKHTMLAttribute.Encode | ARCCore | ClassMember | Encodes the given string to HTML format through the static method implemented in class -Encoder-. |
| ARCCore.PKTypeAttribute.StandardCleaner | ARCCore | ClassMember | Returns a cleaner for well known types like bool |
| ARCCore.PK.AllPKEnums | ARCCore | ClassMember | All -PropertyKeyEnum--tagged enums for the whole application. |
| ARCCore.IHTMLEncoder | ARCCore | Class | Pseudo-interface signifying that implementing class has a static metod called 'Encode' for encoding a string to HTML. |
| ARCCore.PKHTMLAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.PKTypeAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.PK.__enum | ARCCore | ClassMember | This information is also found as EnumMember. |
| ARCCore.PKLogAttribute | ARCCore | Class | Explains how logging of changes to a property should be done. |
| ARCCore.PKHTMLAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.PKTypeAttribute.Type | ARCCore | ClassMember | See -Type-. |
| ARCCore.PKHTMLAttribute | ARCCore | Class | Contains pointer to HTML encoder for a property. |
| ARCCore.PKLogAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.PKHTMLAttribute.Encoder | ARCCore | ClassMember | See -Encoder-. |
| ARCCore.IP.Initialize | ARCCore | ClassMember | Note that has a default implementation (doing nothing). |
| ARCCore.PKRelAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.PKTypeAttribute.Cardinality | ARCCore | ClassMember | See -Cardinality-. |
| ARCCore.PKRelAttribute.EnforceReferentialIntegrity | ARCCore | ClassMember | See -EnforceReferentialIntegrity-. |
| ARCCore.IP.AssertIntegrity | ARCCore | ClassMember | See -TryAssertIntegrity-. |
| ARCCore.PKRelAttribute.TryRemoveP | ARCCore | ClassMember | Should probably never be used. |
| ARCCore.PKTypeAttribute.DefaultValue | ARCCore | ClassMember | See -DefaultValue-. |
| ARCCore.PKRelAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.IP.TryAssertIntegrity | ARCCore | ClassMember | Asserts the integrity of this entity. |
| ARCCore.PKRelAttribute.ForeignEntity | ARCCore | ClassMember | See -ForeignEntity-. |
| ARCCore.PKTypeAttribute.IsObligatory | ARCCore | ClassMember | See -IsObligatory-. |
| ARCCore.PKTypeAttribute | ARCCore | Class | Contains the most basic essential information about a property key, like its description, -Type-, -Cardinality-, -IsObligatory- and -DefaultValue-. |
| ARCCore.IP.ToString | ARCCore | ClassMember | The ToString()-implementation in the classes implementing this interface is supposed to give a short concise representation of the object for debugging and logging purposes, that is, intended for human consumption. The most 'important' implementation is probably the one in -PRich- (-ToString-) because that one is often the basis for your entity classes like 'Customer', 'Order' and so on |
| ARCCore.PKRelAttribute.OppositeTerm | ARCCore | ClassMember | See -OppositeTerm-. |
| ARCCore.PKTypeAttribute.IsDefault | ARCCore | ClassMember | Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.) |
| ARCCore.PKTypeAttribute.Initialize | ARCCore | ClassMember | To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization. |
| ARCCore.IP.AddP | ARCCore | ClassMember | Adds a property for this object. |
| ARCCore.IP | ARCCore | Class | IP = IProperty. |
| ARCCore.IP.TrySetPP | ARCCore | ClassMember | SetPP = set property of property. Sets property of entity contained within this class. |
| ARCCore.IP.Log | ARCCore | ClassMember | The 'final' overload of -Log- that is called by the other overloads. |
| ARCCore.IP.AddOrUpdateP | ARCCore | ClassMember | Duplicates functionality of SetP. |
| ARCCore.IP.TryGetV Overload2 | ARCCore | ClassMember | The actual value of the property. Mostly relevant for single-value properties like -PValue-. |
| ARCCore.IP.GetKeysEqualToValue | ARCCore | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
| ARCCore.IP.LogExecuteTime | ARCCore | ClassMember | Times the execution of the given function and logs details about elapsed time. |
| ARCCore.IP.GetOrAddPV | ARCCore | ClassMember | Gets value. If not set then value will be added |
| ARCCore.IP.Inc | ARCCore | ClassMember | Increments given property key by 1. Sets to 1 if not found. Uses long, not integer. |
| ARCCore.IP.OnTrySetP | ARCCore | ClassMember | Event handler to be called by -TrySetP- before it changes a property value (but AFTER it has done any validity checks, that is, after it has 'decided' to return TRUE, in other words, event handler should be called when change is guaranteed to go through, but before it actually has been done). |
| ARCCore.IP.HandleException | ARCCore | ClassMember | Note that most relevant to use for -PConcurrent-. |
| ARCCore.IP.GetPV | ARCCore | ClassMember | Gets a single property's value for this object. Returns default value if not successful. |
| ARCCore.IP.Dec | ARCCore | ClassMember | Decrements given property key by 1. Sets to -1 if not found. Uses long, not integer. |
| ARCCore.IP.TryGetP | ARCCore | ClassMember | Gets a single property for this object |
| ARCCore.IP.TryParseDtr | ARCCore | ClassMember | Parses a PropertyStreamLine- beginning with -dtr-. |
| ARCCore.IP.AllIPDerivedTypesWithPKEnumApplicationSpecific | ARCCore | ClassMember | All relevant -IP--derived types for the -ApplicationSpecificCode- part of the application for which also is defined a -PropertyKeyEnum-. |
| ARCCore.IP.TryGetV Overload1 | ARCCore | ClassMember | The actual 'unpacking' of the object. |
| ARCCore.IP.TryGetPV | ARCCore | ClassMember | Gets a single property's value for the given property key. |
| ARCCore.IP.ToPropertyStream | ARCCore | ClassMember | Turns object into a -PropertyStream- |
| ARCCore.IP.AllIPDerivedEntityCollectionClassesDict | ARCCore | ClassMember | All -IP--derived types for which is found a corresponding class with name like '{EntityType}Collection' |
| ARCCore.IP.DeepCopy | ARCCore | ClassMember | Creates a deep copy of this object instance, that is, a copy with all new object instances (except for immutable objects). |
| ARCCore.IP.IsValid | ARCCore | ClassMember | Note that by default all properties are 'valid' but because of -NoRealDeletion-, we must have a mechanism for invalidating properties. This property returns FALSE if property has been invalidated and timestamp for invalidation is not '0001-01-01'. |
| ARCCore.IP.ToJSONSerializeable | ARCCore | ClassMember | Prepares the data into a format acceptable for System.Text.Json.JsonSerializer.Serialize. |
| ARCCore.IP.AllIPDerivedTypesInludingGenericAndAbstract | ARCCore | ClassMember | All relevant -IP--derived types (except the interface -IP- itself) known to the application. |
| ARCCore.IP.AddPV Overload2 | ARCCore | ClassMember | NOTE: The different AddPV / AddP overloads should only be used if you want an assertion against the |
| ARCCore.IP.Item | ARCCore | ClassMember | Offers string-based direct indexing. |
| ARCCore.IP.GetValueForJSONSerializer | ARCCore | ClassMember | Practical approach to serializing of -IP- based values to JSON. |
| ARCCore.IP.AllIPDerivedTypesDict | ARCCore | ClassMember | Provides lookup of a type in -AllIPDerivedTypes- given its string representation. |
| ARCCore.IP.AddPV Overload1 | ARCCore | ClassMember | Adds a property value (as a -PValue-) for this objectThrows -KeyAlreadyExistsException- when relevant. |
| ARCCore.IP.Keys | ARCCore | ClassMember | Returns all the keys for this instance. |
| ARCCore.IP.TrySetP | ARCCore | ClassMember | Set property regardless of whether exists or not. |
| ARCCore.IGetKeysEqualToValue | ARCCore | Class | Interface stating that implementing class does not use the default implementation of -GetKeysEqualToValue- (which does not use -Indexing-) but has replaced it with a more efficient implementation assumed to utilize -Indexing-. |
| ARCCore.IP.AllIPDerivedTypesDictIKType | ARCCore | ClassMember | Same as -AllIPDerivedTypesDict- except that value is -IKType-, not string. |
| ARCCore.PCollection.GetKeysEqualToValue | ARCCore | ClassMember | Returns properties which themselves again have key and value equal to the given key and value. |
| ARCCore.IP.Values | ARCCore | ClassMember | Returns all the values (all the properties) for this instance. |
| ARCCore.PConcurrent | ARCCore | Class | A (somewhat) thread-safe alternative to -PRich- which also supports -ExposingApplicationState- (through -Logger-). |
| ARCCore.P | ARCCore | Class | 'Dummy'-class, not necessarily in use. See -PP- for more information. Created because of the concept of CorrespondingClass which is strictly enforced |
| ARCCore.PCollection.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.IP.Logger | ARCCore | ClassMember | Describes a logger. |
| ARCCore.PConcurrent.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.P.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.PCollection.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.IP.AllIPDerivedTypes | ARCCore | ClassMember | All relevant -IP--derived types for the whole application. |
| ARCCore.PExact<TEnumType> | ARCCore | Class | Very -MemoryConsumption- efficient alternative to -PRich-. |
| ARCCore.P.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.PCollection.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.IP.AllIPDerivedTypesWithPKEnum | ARCCore | ClassMember | All relevant -IP--derived types for the whole application for which the also is defined a -PropertyKeyEnum-. |
| ARCCore.PRich.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.PExact<TEnumType>.SetPVDirect | ARCCore | ClassMember | High performance alternative to -TrySetP-, accessing -Storage- more direct. |
| ARCCore.PII.TryGetP | ARCCore | ClassMember | Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway. |
| ARCCore.P.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PRich.TryGetV | ARCCore | ClassMember | Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values). |
| ARCCore.PExact<TEnumType>.GetPVDirect | ARCCore | ClassMember | High performance alternative to -TryGetP-, accessing -Storage- more direct. |
| ARCCore.PII.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.ICreated | ARCCore | Class | A dummy interface signifying that implementing class has the ability to store (in-memory) metadata -Created- |
| ARCCore.PRich.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.PExact<TEnumType>.TryGetPVDirect | ARCCore | ClassMember | High performance alternative to -TryGetP-, accessing -Storage- more direct. |
| ARCCore.IPII | ARCCore | Class | Future expansion, using different classes for storing, not only -PII-. |
| ARCCore.PCollection | ARCCore | Class | A class useful for storing a collection of entities (a table in RDBMS-terms) because it implements -Indexing-. |
| ARCCore.PValue<T> | ARCCore | Class | Single value storage. |
| ARCCore.PExact<TEnumType>.ToString | ARCCore | ClassMember | TODO: Decide on what we actually want with ToString for this class. |
| ARCCore.IIKII | ARCCore | Class | Related to -PII-, property for storing individual items |
| ARCCore.PCollection.TrySetPP | ARCCore | ClassMember | Replaces default interface method -TrySetPP-. |
| ARCCore.ClientUpdatePosition | ARCCore | Class | Describes from WHERE (from WHEN) in the historic -PropertyStream- new data is to be returned. |
| ARCCore.IIKII.PackParseResultForStorageInIKII | ARCCore | ClassMember | This method corresponds to -PackParseResultForStorageInEntityObject-. |
| ARCCore.PValueEmpty.ToPropertyStream | ARCCore | ClassMember | Typicall return value could be something like |
| ARCCore.PExact<TEnumType>..ctor | ARCCore | ClassMember | Set capacity to the number of members in the -PropertyKeyEnum- for this class (minus the __invalid-value) |
| ARCCore.ClientUpdatePosition.Filename | ARCCore | ClassMember | Filename like '2020-04-03 08:42:22_R001' |
| ARCCore.IIKII.PackObjectForStorageInIKII | ARCCore | ClassMember | This method corresponds to -PackObjectForStorageInEntityObject-. |
| ARCCore.ActualConnection | ARCCore | Class | The actual connection, its internal state, queue for sending and so on. |
| ARCCore.PExact<TEnumType>.Storage | ARCCore | ClassMember | Uses int-value of -__enum- minus 1 as index. |
| ARCCore.ClientUpdatePosition.Index | ARCCore | ClassMember | Index (zero-based) into file. Value of -1 means blank update status / no data received at all (or no data received for this specific filename) |
| ARCCore.PReadOnly | ARCCore | Class | Experimental (from Feb 2022) class suitable for classes that do not need to be deserialized, or to accept write requests through -PropertyAccess-. |
| ARCCore.ActualConnection.SetMyUpdatePositionGenerator | ARCCore | ClassMember | Set by -StreamProcessor-. |
| ARCCore.PII | ARCCore | Class | PII = property for storing individual items. |
| ARCCore.ClientUpdatePosition.ClientDatastoreIsEmpty | ARCCore | ClassMember | Used by the subscribing client to signify that it has no data stored locally, and it therefore needs an update from the beginning of the -PropertyStream-, that is, 'from the beginning of time'. |
| ARCCore.PRich | ARCCore | Class | Fully flexible storage. Can store anything. Typical inherited for entity representations like 'Customer' or 'Order'. |
| ARCCore.ActualConnection.SetSinglePropertyStreamReceiver | ARCCore | ClassMember | Set by -StreamProcessor-. |
| ARCCore.PII.TryGetV | ARCCore | ClassMember | Since value is stored in keys, we need to override this method. |
| ARCCore.PropertyStreamLine.Decode | ARCCore | ClassMember | Decodes string as encoded by -EncodeKeyPart- or -EncodeValuePart-. |
| ARCCore.ActualConnection.SetUpToDatePositionGenerator | ARCCore | ClassMember | Set by -StreamProcessor-. Not used by -Client-. |
| ARCCore.ClientUpdatePosition.OnlyNewDataIsRequested | ARCCore | ClassMember | Used by the subscribing client to signify that it does not care about historical data, the server may start with sending only new data. |
| ARCCore.PValue<T>.TrySetP | ARCCore | ClassMember | NOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty- |
| ARCCore.PropertyStreamLine.TryParseDirectToIP | ARCCore | ClassMember | Parses a series of -PropertyStreamLine- directly to the given type of -IP-. |
| ARCCore.ActualConnection.InitializeOutgoingConnection | ARCCore | ClassMember | Relevant for -Outgoing-. |
| ARCCore.ClientUpdatePosition.IsGoBack | ARCCore | ClassMember | Has to be translated by -StreamProcessor- into a concrete filename / index. |
| ARCCore.PValue<T>.TryGetV | ARCCore | ClassMember | Supports duck typing. |
| ARCCore.PropertyStreamLine.TryParseDirectToProperty | ARCCore | ClassMember | Parses direct to a given property value. |
| ARCCore.ActualConnection.Communicate | ARCCore | ClassMember | Common for both -Incoming- and -Outgoing-. |
| ARCCore.ClientUpdatePosition.IsAtEndOfStream | ARCCore | ClassMember | Necessary in order to implement -AdHocQuery-. |
| ARCCore.PValue<T>.ConvertObjectToString | ARCCore | ClassMember | Converts object to string. |
| ARCCore.PropertyStreamLine.ParseAndStore | ARCCore | ClassMember | Note that throws exception if -TryParseAndStore- fails. |
| ARCCore.ActualConnection.LogAndSendErrorConditionData | ARCCore | ClassMember | Called when a serious error condition has been discovered and connection should be terminated. |
| ARCCore.ClientUpdatePosition.ClientDatastoreIsEmptyInstance | ARCCore | ClassMember | See also -ClientDatastoreIsEmpty. |
| ARCCore.PValue<T>.ToString | ARCCore | ClassMember | Do no cache this value, because memory consumption would then increase significantly in your applicationj |
| ARCCore.PropertyStreamLine.ParseAndStoreFailSafe | ARCCore | ClassMember | If either parsing or storing fails then this method will call -StoreFailure- in order to keep some track of why parsing or storing failed. |
| ARCCore.ActualConnection.Send | ARCCore | ClassMember | Sends all messages in queue. |
| ARCCore.ClientUpdatePosition.OnlyNewDataIsRequestedInstance | ARCCore | ClassMember | See also -OnlyNewDataIsRequested. |
| ARCCore.PValue<T>.DeepCopy | ARCCore | ClassMember | Note that if the generic type (T) is not immutable, then what we return will not be a truly deep copy. |
Generated 2026-08-20 18:01:28.904 UTC