[ROOT] doc DocFrag SELECT Assembly, DocFragType, Description.FirstLine() < SKIP 76 > < TAKE 96 >

96 items

DocFragId	Assembly	DocFragType	Description.FirstLine()
ARCCore.ClassAttribute.GetAttribute	ARCCore	ClassMember	Throws exception if type implements -IP- and no corresponding enum found (enum ending with capital letter 'P' (like 'CustomerP' for enum describing class 'Customer' for instance)
ARCCore.IP.AllIPDerivedTypes	ARCCore	ClassMember	All relevant -IP--derived types for the whole application.
ARCCore.ClassAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.IP.AllIPDerivedTypesWithPKEnum	ARCCore	ClassMember	All relevant -IP--derived types for the whole application for which the also is defined a -PropertyKeyEnum-.
ARCCore.ClassAttribute.TryGetAsTypeScript	ARCCore	ClassMember	Generates typescript code corresponding to the class which this instance describes.
ARCCore.P.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.ClassAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.ICreated	ARCCore	Class	A dummy interface signifying that implementing class has the ability to store (in-memory) metadata -Created-
ARCCore.ClassAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PCollection	ARCCore	Class	A class useful for storing a collection of entities (a table in RDBMS-terms) because it implements -Indexing-.
ARCCore.ClassMemberAttribute	ARCCore	Class	Describes a member of a class (a method).
ARCCore.PCollection.TrySetPP	ARCCore	ClassMember	Replaces default interface method -TrySetPP-.
ARCCore.ClassMemberAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PCollection.GetKeysEqualToValue	ARCCore	ClassMember	Returns properties which themselves again have key and value equal to the given key and value.
ARCCore.ClassMemberAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.PCollection.TryGetP	ARCCore	ClassMember	Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway.
ARCCore.ClassMemberAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PCollection.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.EnumAttribute	ARCCore	Class	Describes an enum.
ARCCore.PCollection.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.EnumAttribute.GetAttribute	ARCCore	ClassMember	Throws exception if tagged as -PropertyKeyEnum- and name of type does not end with capital letter 'P' (like 'CustomerP' for enum describing class 'Customer' for instance).
ARCCore.PExact<TEnumType>.SetPVDirect	ARCCore	ClassMember	High performance alternative to -TrySetP-, accessing -Storage- more direct.
ARCCore.EnumAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PExact<TEnumType>.GetPVDirect	ARCCore	ClassMember	High performance alternative to -TryGetP-, accessing -Storage- more direct.
ARCCore.EnumAttribute.TryGetAsTypeScript	ARCCore	ClassMember	Generates typescript code corresponding to the enum which this instance describes.
ARCCore.PExact<TEnumType>.TryGetPVDirect	ARCCore	ClassMember	High performance alternative to -TryGetP-, accessing -Storage- more direct.
ARCCore.EnumAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.PExact<TEnumType>.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.EnumAttribute.IsDefault	ARCCore	ClassMember	Does not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PExact<TEnumType>..ctor	ARCCore	ClassMember	Set capacity to the number of members in the -PropertyKeyEnum- for this class (minus the __invalid-value)
ARCCore.EnumMemberAttribute	ARCCore	Class	Describes an enum's value.
ARCCore.PExact<TEnumType>.Storage	ARCCore	ClassMember	Uses int-value of -__enum- minus 1 as index.
ARCCore.EnumMemberAttribute.GetAttribute	ARCCore	ClassMember	Note that illegal to call for -PropertyKeyEnum-.
ARCCore.PII	ARCCore	Class	PII = property for storing individual items.
ARCCore.EnumMemberAttribute.Initialize	ARCCore	ClassMember	To be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PII.TryGetV	ARCCore	ClassMember	Since value is stored in keys, we need to override this method.
ARCCore.EnumMemberAttribute.TryRemoveP	ARCCore	ClassMember	Should probably never be used.
ARCCore.IIKII.PackParseResultForStorageInIKII	ARCCore	ClassMember	This method corresponds to -PackParseResultForStorageInEntityObject-.
ARCCore.IPAttribute	ARCCore	Class	Describes -IP- classes (describes at class-level)
ARCCore.IIKII.PackObjectForStorageInIKII	ARCCore	ClassMember	This method corresponds to -PackObjectForStorageInEntityObject-.
ARCCore.CardinalityExtensions	ARCCore	Class
ARCCore.PReadOnly	ARCCore	Class	Experimental (from Feb 2022) class suitable for classes that do not need to be deserialized, or to accept write requests through -PropertyAccess-.
ARCCore.CardinalityExtensions.IsMultiple	ARCCore	ClassMember	Returns TRUE if given cardinality implies that multiple items are stored simultaneously in a typical in-memory data storage.
ARCCore.PRich	ARCCore	Class	Fully flexible storage. Can store anything. Typical inherited for entity representations like 'Customer' or 'Order'.
ARCCore.Extensions	ARCCore	Class	Contains a few general nice to have extensions methods.
ARCCore.PRich.TryGetP	ARCCore	ClassMember	Made virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway.
ARCCore.Extensions.ToStringVeryShort	ARCCore	ClassMember	Returns same as -ToStringShort- but without any generics information at all.
ARCCore.PRich.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.Extensions.ToStringDB	ARCCore	ClassMember	Gives the minimum representation of type as string suitable for later reconstruction by -GetType-.
ARCCore.PRich.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.Extensions.ForEach	ARCCore	ClassMember	Useful when we want to write collection.ForEach( ... ) instead of
ARCCore.PValue<T>	ARCCore	Class	Single value storage.
ARCCore.Extensions.Use	ARCCore	ClassMember	Convenience method that shortens down code in cases where an instance of an object must be created first in order to use that same variable multiple times
ARCCore.ActualConnection.Send	ARCCore	ClassMember	Sends all messages in queue.
ARCCore.Extensions.AddValue	ARCCore	ClassMember	Gives better error messages compared to 'original' Add when adding a value to a directory if key already exists
ARCCore.ActualConnection.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.Extensions.KeysAsString	ARCCore	ClassMember	Gives a compressed overview of keys in a dictionary. Helpful for building exception messages.
ARCCore.ActualConnection..ctor	ARCCore	ClassMember	Note parameter-less constructor as desired for all classes inheriting -IP-.
ARCCore.Extensions.GetValue	ARCCore	ClassMember	Gives better error messages when reading value from directory if key does not exist
ARCCore.MonkeyWrench	ARCCore	Class	Describes level of 'spanner-throwing' this connection shall contibute with
ARCCore.Extensions.Single	ARCCore	ClassMember	Same as inbuilt LINQ's Single except that gives a more friendly exception message
ARCCore.ClientUpdatePosition	ARCCore	Class	Describes from WHERE (from WHEN) in the historic -PropertyStream- new data is to be returned.
ARCCore.Extensions.SingleOrDefault	ARCCore	ClassMember	Same as inbuilt LINQ's SingleOrDefault except that gives a more friendly exception message
ARCCore.ClientUpdatePosition.Filename	ARCCore	ClassMember	Filename like '2020-04-03 08:42:22_R001'
ARCCore.Extensions.Result	ARCCore	ClassMember	Returns heading plus return-value of function (calls function). If function == null then empty string is returned
ARCCore.ClientUpdatePosition.Index	ARCCore	ClassMember	Index (zero-based) into file. Value of -1 means blank update status / no data received at all (or no data received for this specific filename)
ARCCore.Extensions.ToStringDateAndTime	ARCCore	ClassMember	Uses format 'yyyy-MM-dd HH:mm:ss.fff'.
ARCCore.ClientUpdatePosition.ClientDatastoreIsEmpty	ARCCore	ClassMember	Used by the subscribing client to signify that it has no data stored locally, and it therefore needs an update from the beginning of the -PropertyStream-, that is, 'from the beginning of time'.
ARCCore.Extensions.ToStringWithMS	ARCCore	ClassMember	Uses either format 'd\.hh\:mm\:ss\.fff' or 'hh\:mm\:ss\.fff' depending on TotalHours >=24 hours or not.
ARCCore.ConnectionInstruction.TryGetV	ARCCore	ClassMember	Note that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.IK	ARCCore	Class	IK = Interface Key / Index key. Key used to lookup 'inside' an instance of -IP-.
ARCCore.ConnectionInstruction.ToString	ARCCore	ClassMember	TODO: Decide on what we actually want with ToString for this class.
ARCCore.IKCoded	ARCCore	Class	Understands coded and unencoded variants of -IK-.
ARCCore.Sharding	ARCCore	Class	Enables load-balancing by describing what data should be sent over a given connection.
ARCCore.IKCoded.EnrichKey	ARCCore	ClassMember	'Implementing' -ITypeDescriber-.
ARCCore.PropertyStreamLine	ARCCore	Class	Has two main functions:
ARCCore.IKCoded.TryCheckValidEncodedValue	ARCCore	ClassMember	Checks if encoded value is valid.
ARCCore.PropertyStreamLine.EncodeKeys	ARCCore	ClassMember	Encodes the key part of a -PropertyStreamLine-.
ARCCore.IKCoded.FromEncoded	ARCCore	ClassMember	Note how uses instance cache if already exists there.
ARCCore.PropertyStreamLine.EncodeValues	ARCCore	ClassMember	Typically used when turning -WholeCollection- into a value part of a -PropertyStreamLine-.
ARCCore.IKCoded.TryEncode	ARCCore	ClassMember	Returns a string containing only characters in -AllowedEncodedCharacters-.
ARCCore.PropertyStreamLine.EncodeKeyPart	ARCCore	ClassMember	Converts a single key part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-.
ARCCore.IKCoded.ToString	ARCCore	ClassMember	Returns -Encoded-'s string representation.
ARCCore.PropertyStreamLine.EncodeValuePart	ARCCore	ClassMember	Converts a single value part of a -PropertyStreamLine- to a format suitable for sending over a -PropertyStream-.
ARCCore.IKCoded.Encoded	ARCCore	ClassMember	This string value can be used directly in folder names, file names and HTTP URL's without any further encoding being necessary.
ARCCore.PropertyStreamLine.AllowedKeyChars	ARCCore	ClassMember	Allowed characters in the Key-part of a -PropertyStreamLine-.
ARCCore.IKLong.op_Equality	ARCCore	ClassMember	It is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here.
ARCCore.PropertyStreamLine.AllowedValueChars	ARCCore	ClassMember	Allowed characters in the Value-part of a -PropertyStreamLine-.
ARCCore.IKLong.EnrichKey	ARCCore	ClassMember	'Implementing' -ITypeDescriber-.
ARCCore.PropertyStreamLineParsed	ARCCore	Class	Parses the keys part of a line from -PropertyStream-, like 'Customer/42/FirstName = John.
ARCCore.IKString	ARCCore	Class	Index key for any general id, like primary-key or sequence-number or similar.
ARCCore.PropertyStreamLineParsed.ToString	ARCCore	ClassMember	Note relatively complex operation of 'restoring' original property stream line.
ARCCore.IKString.FromCache	ARCCore	ClassMember	Reduces number of objects generated by caching those known to be within a limited range
ARCCore.PropertyStreamLineParsed.TryParse	ARCCore	ClassMember	Generate list of <(IK key, Type valueType)> together with value from value part.
ARCCore.IKString.EnrichKey	ARCCore	ClassMember	'Implementing' -ITypeDescriber-.
ARCCore.PropertyStreamLineParsed.IsComment	ARCCore	ClassMember	Signifies that property stream line given for parsing started with '//' (two forward slashes).

Generated 2026-03-01 05:14:01.368 UTC