[ROOT]  doc  DocFrag  SELECT Assembly, DocFragType, Description.FirstLine()   <  SKIP 83  >   <  TAKE 124  >   

124 items

DocFragIdAssemblyDocFragTypeDescription.FirstLine()
ARCCore.IP.GetKeysEqualToValueARCCoreClassMemberReturns properties which themselves again have key and value equal to the given key and value.
ARCCore.IP.AssertIntegrityARCCoreClassMemberSee -TryAssertIntegrity-.
ARCCore.IP.OnTrySetPARCCoreClassMemberEvent handler to be called by -TrySetP- before it changes a property value (but AFTER it has done any validity checks, that is, after it has 'decided' to return TRUE, in other words, event handler should be called when change is guaranteed to go through, but before it actually has been done).
ARCCore.IP.TryAssertIntegrityARCCoreClassMemberAsserts the integrity of this entity.
ARCCore.IP.TryGetPARCCoreClassMemberGets a single property for this object
ARCCore.IP.ToStringARCCoreClassMemberThe ToString()-implementation in the classes implementing this interface is supposed to give a short concise representation of the object for debugging and logging purposes, that is, intended for human consumption. The most 'important' implementation is probably the one in -PRich- (-ToString-) because that one is often the basis for your entity classes like 'Customer', 'Order' and so on
ARCCore.IP.ValuesARCCoreClassMemberReturns all the values (all the properties) for this instance.
ARCCore.IP.AddPARCCoreClassMemberAdds a property for this object.
ARCCore.IP.LoggerARCCoreClassMemberDescribes a logger.
ARCCore.IP.AddOrUpdatePARCCoreClassMemberDuplicates functionality of SetP.
ARCCore.IP.AllIPDerivedTypesARCCoreClassMemberAll relevant -IP--derived types for the whole application.
ARCCore.IP.GetOrAddPVARCCoreClassMemberGets value. If not set then value will be added
ARCCore.IP.AllIPDerivedTypesWithPKEnumARCCoreClassMemberAll relevant -IP--derived types for the whole application for which the also is defined a -PropertyKeyEnum-.
ARCCore.IP.GetPVARCCoreClassMemberGets a single property's value for this object. Returns default value if not successful.
ARCCore.PCollection.GetKeysEqualToValueARCCoreClassMemberReturns properties which themselves again have key and value equal to the given key and value.
ARCCore.IP.AllIPDerivedTypesDictIKTypeARCCoreClassMemberSame as -AllIPDerivedTypesDict- except that value is -IKType-, not string.
ARCCore.PCollection.TryGetPARCCoreClassMemberMade virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway.
ARCCore.PARCCoreClass'Dummy'-class, not necessarily in use. See -PP- for more information. Created because of the concept of CorrespondingClass which is strictly enforced
ARCCore.PCollection.TryGetVARCCoreClassMemberNote that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.P.TryGetPARCCoreClassMemberMade virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway.
ARCCore.PCollection.ToStringARCCoreClassMemberTODO: Decide on what we actually want with ToString for this class.
ARCCore.P.TryGetVARCCoreClassMemberNote that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.PII.TryGetPARCCoreClassMemberMade virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway.
ARCCore.PExact<TEnumType>.SetPVDirectARCCoreClassMemberHigh performance alternative to -TrySetP-, accessing -Storage- more direct.
ARCCore.PII.ToStringARCCoreClassMemberTODO: Decide on what we actually want with ToString for this class.
ARCCore.PExact<TEnumType>.GetPVDirectARCCoreClassMemberHigh performance alternative to -TryGetP-, accessing -Storage- more direct.
ARCCore.IPIIARCCoreClassFuture expansion, using different classes for storing, not only -PII-.
ARCCore.PExact<TEnumType>.TryGetPVDirectARCCoreClassMemberHigh performance alternative to -TryGetP-, accessing -Storage- more direct.
ARCCore.IIKIIARCCoreClassRelated to -PII-, property for storing individual items
ARCCore.PExact<TEnumType>.ToStringARCCoreClassMemberTODO: Decide on what we actually want with ToString for this class.
ARCCore.PValue<T>.DeepCopyARCCoreClassMemberNote that if the generic type (T) is not immutable, then what we return will not be a truly deep copy.
ARCCore.IIKII.PackParseResultForStorageInIKIIARCCoreClassMemberThis method corresponds to -PackParseResultForStorageInEntityObject-.
ARCCore.PValue<T>..ctorARCCoreClassMemberNote how this class does not have a parameter-less constructor (unlike all other -IP--derived classes in AgoRapide)
ARCCore.IIKII.PackObjectForStorageInIKIIARCCoreClassMemberThis method corresponds to -PackObjectForStorageInEntityObject-.
ARCCore.PValueEmptyARCCoreClassRepresents the 'no value'.
ARCCore.PReadOnlyARCCoreClassExperimental (from Feb 2022) class suitable for classes that do not need to be deserialized, or to accept write requests through -PropertyAccess-.
ARCCore.PValueEmpty.TrySetPARCCoreClassMemberNOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty-
ARCCore.PRichARCCoreClassFully flexible storage. Can store anything. Typical inherited for entity representations like 'Customer' or 'Order'.
ARCCore.PValueEmpty.ToPropertyStreamARCCoreClassMemberTypicall return value could be something like
ARCCore.PRich.TryGetPARCCoreClassMemberMade virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway.
ARCCore.ActualConnectionARCCoreClassThe actual connection, its internal state, queue for sending and so on.
ARCCore.PRich.TryGetVARCCoreClassMemberNote that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.ActualConnection.SetMyUpdatePositionGeneratorARCCoreClassMemberSet by -StreamProcessor-.
ARCCore.PRich.ToStringARCCoreClassMemberTODO: Decide on what we actually want with ToString for this class.
ARCCore.ActualConnection.SetSinglePropertyStreamReceiverARCCoreClassMemberSet by -StreamProcessor-.
ARCCore.PValue<T>ARCCoreClassSingle value storage.
ARCCore.ClassAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.ClassMemberAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.EnumAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.IPAttributeARCCoreClassDescribes -IP- classes (describes at class-level)
ARCCore.Extensions.ToStringShortARCCoreClassMemberReturns a shorter representation than -ToStringDB-.
ARCCore.Extensions.ForEachARCCoreClassMemberUseful when we want to write collection.ForEach( ... ) instead of
ARCCore.Extensions.SingleARCCoreClassMemberSame as inbuilt LINQ's Single except that gives a more friendly exception message
ARCCore.Extensions.ToStringDateAndTimeARCCoreClassMemberUses format 'yyyy-MM-dd HH:mm:ss.fff'.
ARCCore.IKARCCoreClassIK = Interface Key / Index key. Key used to lookup 'inside' an instance of -IP-.
ARCCore.IKCodedARCCoreClassUnderstands coded and unencoded variants of -IK-.
ARCCore.IKCoded.ToStringARCCoreClassMemberReturns -Encoded-'s string representation.
ARCCore.IKCoded.EncodedARCCoreClassMemberThis string value can be used directly in folder names, file names and HTTP URL's without any further encoding being necessary.
ARCCore.IKLong.op_EqualityARCCoreClassMemberIt is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here.
ARCCore.IKLong.EnrichKeyARCCoreClassMember'Implementing' -ITypeDescriber-.
ARCCore.IKType.ToStringARCCoreClassMemberCaching is supposed to be useful because may be called quite often.
ARCCore.ITypeDescriberARCCoreClassProvides a standardized mechanism for describing single-property values (like 'PhoneNumber' of 'Customer' for instance).
ARCCore.PKARCCoreClassPK = AgoRapide PropertyKey.
ARCCore.PK.TryGetEnumARCCoreClassMemberNote that usually you will not have to ask for this value, usually in AgoRapide it goes the other way around, you have the enum member / enum value and want the corresponding property key.
ARCCore.PK.PackObjectForStorageInEntityObjectARCCoreClassMemberSee -PackParseResultForStorageInEntityObject- for documentation.
ARCCore.PK.FromEnumARCCoreClassMemberReturns the corresponding -PK- instance from the given -PropertyKeyEnum-.
ARCCore.PK.GetTypeMappingARCCoreClassMemberReturns the relevant property key for a given type entity-type and field-type.
ARCCore.PK.GetObligatoryValuesForEntityTypeARCCoreClassMemberReturns all obligatory values (based on -IsObligatory-)
ARCCore.PK.ValidatorAndParserARCCoreClassMemberValidates and parses a value.
ARCCore.PK.CleanerARCCoreClassMemberCleanup of values, to be used before value is attempted validated.
ARCCore.PKHTMLAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.IHTMLEncoderARCCoreClassPseudo-interface signifying that implementing class has a static metod called 'Encode' for encoding a string to HTML.
ARCCore.PKLogAttributeARCCoreClassExplains how logging of changes to a property should be done.
ARCCore.PKLogAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.IPARCCoreClassIP = IProperty.
ARCCore.IP.TryGetV Overload2ARCCoreClassMemberThe actual value of the property. Mostly relevant for single-value properties like -PValue-.
ARCCore.IP.IncARCCoreClassMemberIncrements given property key by 1. Sets to 1 if not found. Uses long, not integer.
ARCCore.IP.DecARCCoreClassMemberDecrements given property key by 1. Sets to -1 if not found. Uses long, not integer.
ARCCore.IP.ToPropertyStreamARCCoreClassMemberTurns object into a -PropertyStream-
ARCCore.IP.ToJSONSerializeableARCCoreClassMemberPrepares the data into a format acceptable for System.Text.Json.JsonSerializer.Serialize.
ARCCore.IP.GetValueForJSONSerializerARCCoreClassMemberPractical approach to serializing of -IP- based values to JSON.
ARCCore.IP.TrySetPARCCoreClassMemberSet property regardless of whether exists or not.
ARCCore.IP.TryGetPVARCCoreClassMemberGets a single property's value for the given property key.
ARCCore.IP.IsValidARCCoreClassMemberNote that by default all properties are 'valid' but because of -NoRealDeletion-, we must have a mechanism for invalidating properties. This property returns FALSE if property has been invalidated and timestamp for invalidation is not '0001-01-01'.
ARCCore.IP.ItemARCCoreClassMemberOffers string-based direct indexing.
ARCCore.IP.KeysARCCoreClassMemberReturns all the keys for this instance.
ARCCore.P.ToStringARCCoreClassMemberTODO: Decide on what we actually want with ToString for this class.
ARCCore.ICreatedARCCoreClassA dummy interface signifying that implementing class has the ability to store (in-memory) metadata -Created-
ARCCore.PCollectionARCCoreClassA class useful for storing a collection of entities (a table in RDBMS-terms) because it implements -Indexing-.
ARCCore.PCollection.TrySetPPARCCoreClassMemberReplaces default interface method -TrySetPP-.
ARCCore.PExact<TEnumType>..ctorARCCoreClassMemberSet capacity to the number of members in the -PropertyKeyEnum- for this class (minus the __invalid-value)
ARCCore.PExact<TEnumType>.StorageARCCoreClassMemberUses int-value of -__enum- minus 1 as index.
ARCCore.PIIARCCoreClassPII = property for storing individual items.
ARCCore.PII.TryGetVARCCoreClassMemberSince value is stored in keys, we need to override this method.
ARCCore.PValue<T>.TrySetPARCCoreClassMemberNOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty-
ARCCore.PValue<T>.TryGetVARCCoreClassMemberSupports duck typing.
ARCCore.PValue<T>.ConvertObjectToStringARCCoreClassMemberConverts object to string.
ARCCore.PValue<T>.ToStringARCCoreClassMemberDo no cache this value, because memory consumption would then increase significantly in your applicationj
ARCCore.ActualConnection.SendARCCoreClassMemberSends all messages in queue.
ARCCore.ActualConnection.ToStringARCCoreClassMemberTODO: Decide on what we actually want with ToString for this class.
ARCCore.ActualConnection..ctorARCCoreClassMemberNote parameter-less constructor as desired for all classes inheriting -IP-.
ARCCore.MonkeyWrenchARCCoreClassDescribes level of 'spanner-throwing' this connection shall contibute with
ARCCore.ClientUpdatePosition.OnlyNewDataIsRequestedARCCoreClassMemberUsed by the subscribing client to signify that it does not care about historical data, the server may start with sending only new data.
ARCCore.ClientUpdatePosition.IsGoBackARCCoreClassMemberHas to be translated by -StreamProcessor- into a concrete filename / index.
ARCCore.ClientUpdatePosition.IsAtEndOfStreamARCCoreClassMemberNecessary in order to implement -AdHocQuery-.
ARCCore.ClientUpdatePosition.ClientDatastoreIsEmptyInstanceARCCoreClassMemberSee also -ClientDatastoreIsEmpty.
ARCCore.ClientUpdatePosition.OnlyNewDataIsRequestedInstanceARCCoreClassMemberSee also -OnlyNewDataIsRequested.
ARCCore.ConnectionInstructionARCCoreClassThe instruction about what connections to make (host, portnr, data transfer direction and so on).
ARCCore.ConnectionInstruction.InitializeARCCoreClassMemberInitializes to sane values.
ARCCore.ConnectionInstruction.TryGetPARCCoreClassMemberMade virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway.
ARCCore.BaseAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.BaseAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.BasePKAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.ClassAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.EnumAttribute.GetAttributeARCCoreClassMemberThrows exception if tagged as -PropertyKeyEnum- and name of type does not end with capital letter 'P' (like 'CustomerP' for enum describing class 'Customer' for instance).
ARCCore.EnumMemberAttributeARCCoreClassDescribes an enum's value.
ARCCore.EnumMemberAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.ExtensionsARCCoreClassContains a few general nice to have extensions methods.
ARCCore.Extensions.UseARCCoreClassMemberConvenience method that shortens down code in cases where an instance of an object must be created first in order to use that same variable multiple times
ARCCore.Extensions.AddValueARCCoreClassMemberGives better error messages compared to 'original' Add when adding a value to a directory if key already exists
ARCCore.IKIP.AssertTypeIntegrityARCCoreClassMemberSee -TryAssertTypeIntegrity- for documentation.
ARCCore.IKIP.TryAssertTypeIntegrityARCCoreClassMemberAsserts that value is of correct type as specified by the key.
ARCCore.IKCoded.FromEncodedARCCoreClassMemberNote how uses instance cache if already exists there.
ARCCore.IKCoded.TryEncodeARCCoreClassMemberReturns a string containing only characters in -AllowedEncodedCharacters-.

Generated 2026-08-21 00:18:25.921 UTC