[ROOT]  doc  DocFrag  SELECT Assembly, DocFragType, Description.FirstLine()   <  SKIP 27  >   <  TAKE 96  >   

96 items

DocFragIdAssemblyDocFragTypeDescription.FirstLine()
ARCCore.IKDate.op_EqualityARCCoreClassMemberIt is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here.
ARCCore.IKDate.EnrichKeyARCCoreClassMember'Implementing' -ITypeDescriber-.
ARCCore.IKType.ToStringARCCoreClassMemberCaching is supposed to be useful because may be called quite often.
ARCCore.ITypeDescriberARCCoreClassProvides a standardized mechanism for describing single-property values (like 'PhoneNumber' of 'Customer' for instance).
ARCCore.ITypeDescriber.GetSyntaxHelpARCCoreClassMemberEnables explanation of syntax in different contexts from one source:
ARCCore.ParseResultARCCoreClassNOTE: Concept is very old, from the dark ages of AgoRapide's very first inception. There might be room for improvement.
ARCCore.PK.TryCleanValidateAndParseARCCoreClassMemberCleans and parses the value according to specifications for this property key.
ARCCore.PK.PackParseResultForStorageInEntityObjectARCCoreClassMemberPacks result of parsing into a -IP--derived class, suitable for sending to -AddOrUpdateP-.
ARCCore.PK.PackObjectForStorageInEntityObjectARCCoreClassMemberSee -PackParseResultForStorageInEntityObject- for documentation.
ARCCore.PK.FromEnumARCCoreClassMemberReturns the corresponding -PK- instance from the given -PropertyKeyEnum-.
ARCCore.PK.ValidatorAndParserARCCoreClassMemberValidates and parses a value.
ARCCore.PK.CleanerARCCoreClassMemberCleanup of values, to be used before value is attempted validated.
ARCCore.PK.AllEnumsARCCoreClassMemberAll enums for the whole application.
ARCCore.PK.AllPKEnumsARCCoreClassMemberAll -PropertyKeyEnum--tagged enums for the whole application.
ARCCore.PKLogAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.PKRelAttributeARCCoreClassDescribes relationships between entities (between tables in RDBMS terms).
ARCCore.PKRelAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PKRelAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.IPARCCoreClassIP = IProperty.
ARCCore.IP.TryGetV Overload2ARCCoreClassMemberThe actual value of the property. Mostly relevant for single-value properties like -PValue-.
ARCCore.IP.IncARCCoreClassMemberIncrements given property key by 1. Sets to 1 if not found. Uses long, not integer.
ARCCore.IP.DecARCCoreClassMemberDecrements given property key by 1. Sets to -1 if not found. Uses long, not integer.
ARCCore.IP.ToPropertyStreamARCCoreClassMemberTurns object into a -PropertyStream-
ARCCore.IP.ToJSONSerializeableARCCoreClassMemberPrepares the data into a format acceptable for System.Text.Json.JsonSerializer.Serialize.
ARCCore.IP.GetValueForJSONSerializerARCCoreClassMemberPractical approach to serializing of -IP- based values to JSON.
ARCCore.IP.TrySetPARCCoreClassMemberSet property regardless of whether exists or not.
ARCCore.IP.TryGetPVARCCoreClassMemberGets a single property's value for the given property key.
ARCCore.IP.IsValidARCCoreClassMemberNote that by default all properties are 'valid' but because of -NoRealDeletion-, we must have a mechanism for invalidating properties. This property returns FALSE if property has been invalidated and timestamp for invalidation is not '0001-01-01'.
ARCCore.IP.ItemARCCoreClassMemberOffers string-based direct indexing.
ARCCore.IP.KeysARCCoreClassMemberReturns all the keys for this instance.
ARCCore.IGetKeysEqualToValueARCCoreClassInterface stating that implementing class does not use the default implementation of -GetKeysEqualToValue- (which does not use -Indexing-) but has replaced it with a more efficient implementation assumed to utilize -Indexing-.
ARCCore.PConcurrentARCCoreClassA (somewhat) thread-safe alternative to -PRich- which also supports -ExposingApplicationState- (through -Logger-).
ARCCore.PConcurrent.ToStringARCCoreClassMemberTODO: Decide on what we actually want with ToString for this class.
ARCCore.PExact<TEnumType>ARCCoreClassVery -MemoryConsumption- efficient alternative to -PRich-.
ARCCore.PExact<TEnumType>.SetPVDirectARCCoreClassMemberHigh performance alternative to -TrySetP-, accessing -Storage- more direct.
ARCCore.PExact<TEnumType>.GetPVDirectARCCoreClassMemberHigh performance alternative to -TryGetP-, accessing -Storage- more direct.
ARCCore.PExact<TEnumType>.TryGetPVDirectARCCoreClassMemberHigh performance alternative to -TryGetP-, accessing -Storage- more direct.
ARCCore.PExact<TEnumType>.ToStringARCCoreClassMemberTODO: Decide on what we actually want with ToString for this class.
ARCCore.BaseAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.BaseAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.BasePKAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.ClassAttributeARCCoreClassDescribes a class.
ARCCore.ClassAttribute.TryGetAsTypeScriptARCCoreClassMemberGenerates typescript code corresponding to the class which this instance describes.
ARCCore.ClassMemberAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.EnumAttribute.GetAttributeARCCoreClassMemberThrows exception if tagged as -PropertyKeyEnum- and name of type does not end with capital letter 'P' (like 'CustomerP' for enum describing class 'Customer' for instance).
ARCCore.EnumAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.EnumMemberAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.IPAttributeARCCoreClassDescribes -IP- classes (describes at class-level)
ARCCore.Extensions.ForEachARCCoreClassMemberUseful when we want to write collection.ForEach( ... ) instead of
ARCCore.Extensions.UseARCCoreClassMemberConvenience method that shortens down code in cases where an instance of an object must be created first in order to use that same variable multiple times
ARCCore.Extensions.GetValueARCCoreClassMemberGives better error messages when reading value from directory if key does not exist
ARCCore.Extensions.SingleARCCoreClassMemberSame as inbuilt LINQ's Single except that gives a more friendly exception message
ARCCore.IKIP.TryAssertTypeIntegrityARCCoreClassMemberAsserts that value is of correct type as specified by the key.
ARCCore.IKARCCoreClassIK = Interface Key / Index key. Key used to lookup 'inside' an instance of -IP-.
ARCCore.IKLongARCCoreClassA more memory efficient alternative to -IKString-.
ARCCore.IKLong.op_EqualityARCCoreClassMemberIt is quite natural in the code to write code like "if (a.CustomerId == b.CustomerId)", therefore the need to implement == and != operators here.
ARCCore.IKString.EnrichKeyARCCoreClassMember'Implementing' -ITypeDescriber-.
ARCCore.IKTypeARCCoreClassIndex key used when storing a collection of a given type, like 'Customer'.
ARCCore.PK.GetAARCCoreClassMemberConvenience method for easy access to -BasePKAttribute- with corresponding explaining exception if fails
ARCCore.PK.TryGetAARCCoreClassMemberConvenience method for easy access to -BasePKAttribute-.
ARCCore.PK.TryGetFromTypeAndFieldName Overload3ARCCoreClassMemberReturns property key based on type and field name.
ARCCore.PK.TryGetFromTypeAndFieldName Overload2ARCCoreClassMemberReturns property key based on type and field name.
ARCCore.PK.EqualsARCCoreClassMemberNote that ToString is only based on __enum, meaning that two enum members / enum values with same name but different type, like CustomerP.Name and OrderP.Name, will be considered equal.
ARCCore.PK.TryGetPARCCoreClassMemberMade virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway.
ARCCore.PK..ctorARCCoreClassMemberConstructor with 'object _enum' is necessary in order for ToString to work.
ARCCore.PK.TypeARCCoreClassMemberReturns type from -PKTypeAttribute-'s -Type-.
ARCCore.PKHTMLAttribute.IsDefaultARCCoreClassMemberDoes not have a corresponding -BaseAttributeP- since all attributes relevant for querying (for instance in the documentation) will be IsDefault = FALSE anyway. (if we had included it in -BaseAttributeP- it would just have led to a lot of confusing IsDefault = FALSE key-values showing up.)
ARCCore.IHTMLEncoderARCCoreClassPseudo-interface signifying that implementing class has a static metod called 'Encode' for encoding a string to HTML.
ARCCore.PKLogAttributeARCCoreClassExplains how logging of changes to a property should be done.
ARCCore.PKLogAttribute.InitializeARCCoreClassMemberTo be overridden in sub-classes, but do note that sub-classes are supposed to call base.Initialize() at end of their own initialization.
ARCCore.PKTypeAttribute.TryRemovePARCCoreClassMemberShould probably never be used.
ARCCore.PKTypeAttribute.TypeARCCoreClassMemberSee -Type-.
ARCCore.PKTypeAttribute.CardinalityARCCoreClassMemberSee -Cardinality-.
ARCCore.PKTypeAttribute.DefaultValueARCCoreClassMemberSee -DefaultValue-.
ARCCore.IP.InitializeARCCoreClassMemberNote that has a default implementation (doing nothing).
ARCCore.IP.AssertIntegrityARCCoreClassMemberSee -TryAssertIntegrity-.
ARCCore.IP.TryAssertIntegrityARCCoreClassMemberAsserts the integrity of this entity.
ARCCore.IP.ToStringARCCoreClassMemberThe ToString()-implementation in the classes implementing this interface is supposed to give a short concise representation of the object for debugging and logging purposes, that is, intended for human consumption. The most 'important' implementation is probably the one in -PRich- (-ToString-) because that one is often the basis for your entity classes like 'Customer', 'Order' and so on
ARCCore.IP.AddPARCCoreClassMemberAdds a property for this object.
ARCCore.IP.AddOrUpdatePARCCoreClassMemberDuplicates functionality of SetP.
ARCCore.IP.GetOrAddPVARCCoreClassMemberGets value. If not set then value will be added
ARCCore.IP.GetPVARCCoreClassMemberGets a single property's value for this object. Returns default value if not successful.
ARCCore.IP.AllIPDerivedTypesDictIKTypeARCCoreClassMemberSame as -AllIPDerivedTypesDict- except that value is -IKType-, not string.
ARCCore.PARCCoreClass'Dummy'-class, not necessarily in use. See -PP- for more information. Created because of the concept of CorrespondingClass which is strictly enforced
ARCCore.P.TryGetPARCCoreClassMemberMade virtual 13 Jan 2022. Possibly the same could be done for all other methods here since _properties is Protected anyway.
ARCCore.P.TryGetVARCCoreClassMemberNote that 'normally' this method would be irrelevant for a -PRich- object because we will usually be an entity object (like 'Customer') not having an intrinsic value ourselves per se (because we will instead be containing a list of values).
ARCCore.PExact<TEnumType>..ctorARCCoreClassMemberSet capacity to the number of members in the -PropertyKeyEnum- for this class (minus the __invalid-value)
ARCCore.PExact<TEnumType>.StorageARCCoreClassMemberUses int-value of -__enum- minus 1 as index.
ARCCore.PIIARCCoreClassPII = property for storing individual items.
ARCCore.PII.TryGetVARCCoreClassMemberSince value is stored in keys, we need to override this method.
ARCCore.PValue<T>.TrySetPARCCoreClassMemberNOTE: -TryStore- is explicit aware that -PValue- and -PValueEmpty-
ARCCore.PValue<T>.TryGetVARCCoreClassMemberSupports duck typing.
ARCCore.PValue<T>.ConvertObjectToStringARCCoreClassMemberConverts object to string.
ARCCore.PValue<T>.ToStringARCCoreClassMemberDo no cache this value, because memory consumption would then increase significantly in your applicationj
ARCCore.ClientUpdatePosition.OnlyNewDataIsRequestedARCCoreClassMemberUsed by the subscribing client to signify that it does not care about historical data, the server may start with sending only new data.
ARCCore.ClientUpdatePosition.IsGoBackARCCoreClassMemberHas to be translated by -StreamProcessor- into a concrete filename / index.

Generated 2026-05-18 13:57:33.447 UTC